master
1/* $NetBSD: hid.h,v 1.13.20.1 2024/02/03 11:47:07 martin Exp $ */
2
3/*-
4 * Copyright (c) 2000 Tsubai Masanari. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#ifndef _POWERPC_OEA_HID_H_
30#define _POWERPC_OEA_HID_H_
31
32#ifdef _KERNEL_OPT
33#include "opt_ppcarch.h"
34#endif
35
36/* Hardware Implementation Dependent registers for the PowerPC */
37
38#if defined(_ARCH_PPC64) || defined (PPC_OEA64_BRIDGE)
39/* this way we can use the same bit numbers as IBM's PowerPC manuals */
40#define HIDBIT(x) (0x8000000000000000LL >> x)
41#define HID0_64_ONE_PPC HIDBIT(0) /* one instruction per dispatch group */
42#define HID0_64_DO_SNGL HIDBIT(1) /* single group completion mode */
43#define HID0_64_ISYNCSC HIDBIT(2) /* Disable isync scoreboard optimization */
44#define HID0_64_SER_GP HIDBIT(3) /* Serialize group dispatch */
45#define HID0_64_DEEPNAP HIDBIT(7) /* Enable deep nap mode (970) */
46#define HID0_64_DOZE HIDBIT(8) /* Enable doze mode */
47#define HID0_64_NAP HIDBIT(9) /* Enable nap mode */
48#define HID0_64_DPM HIDBIT(11) /* Enable Dynamic power management */
49#define HID0_64_TG HIDBIT(13) /* Perfmon threshold granularity control */
50#define HID0_64_HNG_DIS HIDBIT(14) /* Disable processor hang-detection */
51#define HID0_64_NHR HIDBIT(15) /* No Hard Reset */
52#define HID0_64_INORDER HIDBIT(16) /* Serialized group issue mode */
53#define HID0_64_TB_CTRL HIDBIT(18) /* TB keeps running if CPU stopped */
54#define HID0_64_EX_TBEN HIDBIT(19) /* timebase runs at external clock */
55#define HID0_64_CIABREN HIDBIT(22) /* enable CIABR register */
56#define HID0_64_HDICEEN HIDBIT(23) /* hypervisor decrementer enable */
57#define HID0_64_EN_ATTN HIDBIT(31) /* support processor attention inst. */
58#define HID0_64_EN_MCHK HIDBIT(32) /* ext. mchk interrupts */
59#endif
60#define HID0_EMCP 0x80000000 /* Enable MCP */
61#define HID0_DBP 0x40000000 /* Disable 60x bus parity generation */
62#define HID0_EBA 0x20000000 /* Enable 60x bus address parity checking */
63#define HID0_EBD 0x10000000 /* Enable 60x bus data parity checking */
64#define HID0_BCLK 0x08000000 /* CLK_OUT clock type selection */
65#define HID0_EICE 0x04000000 /* Enable ICE output */
66#define HID0_TBEN 0x04000000 /* Time base enable (7450) */
67#define HID0_ECLK 0x02000000 /* CLK_OUT clock type selection */
68#define HID0_PAR 0x01000000 /* Disable precharge of ARTRY */
69#define HID0_STEN 0x01000000 /* Software table search enable (7450) */
70#define HID0_DOZE 0x00800000 /* Enable doze mode */
71#define HID0_HIGH_BAT_EN 0x00800000 /* Enable additional BATs (74[45][578]) */
72#define HID0_NAP 0x00400000 /* Enable nap mode */
73#define HID0_SLEEP 0x00200000 /* Enable sleep mode */
74#define HID0_DPM 0x00100000 /* Enable Dynamic power management */
75#define HID0_RISEG 0x00080000 /* Read I-SEG */
76#define HID0_BHTCLR 0x00040000 /* Clear branch history table (7450) */
77#define HID0_EIEC 0x00040000 /* Enable internal error checking */
78#define HID0_XAEN 0x00020000 /* Enable eXtended Addressing (7450) */
79#define HID0_NHR 0x00010000 /* Not hard reset */
80#define HID0_ICE 0x00008000 /* Enable i-cache */
81#define HID0_DCE 0x00004000 /* Enable d-cache */
82#define HID0_ILOCK 0x00002000 /* i-cache lock */
83#define HID0_DLOCK 0x00001000 /* d-cache lock */
84#define HID0_ICFI 0x00000800 /* i-cache flash invalidate */
85#define HID0_DCFI 0x00000400 /* d-cache flash invalidate */
86#define HID0_SPD 0x00000200 /* Disable speculative cache access */
87#define HID0_IFEM 0x00000100 /* Enable M-bit for I-fetch */
88#define HID0_XBSEN 0x00000100 /* Extended BAT block size enable (7455+) */
89#define HID0_SGE 0x00000080 /* Enable store gathering */
90#define HID0_DCFA 0x00000040 /* Data cache flush assist */
91#define HID0_BTIC 0x00000020 /* Enable BTIC */
92#define HID0_LRSTK 0x00000010 /* Link register stack enable (7450) */
93#define HID0_ABE 0x00000008 /* Enable address broadcast */
94#define HID0_FOLD 0x00000008 /* Branch folding enable (7450) */
95#define HID0_BHT 0x00000004 /* Enable branch history table */
96#define HID0_BTCD 0x00000002 /* Branch target addr cache disable (604) */
97#define HID0_NOPTI 0x00000001 /* No-op the dcbt(st) */
98
99#define HID0_BITMASK "\020" \
100 "\040EMCP\037DBP\036EBA\035EBD\034BCLK\033EICE\032ECLK\031PAR" \
101 "\030DOZE\027NAP\026SLEEP\025DPM\024RISEG\023EIEC\022res\021NHR" \
102 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011IFEM" \
103 "\010SGE\007DCFA\006BTIC\005FBIOB\004ABE\003BHT\002NOPDST\001NOPTI"
104
105#define HID0_7450_BITMASK "\020" \
106 "\040EMCP\037b1\036b2\035b3\034b4\033TBEN\032b6\031STEN" \
107 "\030HIGH_BAT_EN\027NAP\026SLEEP\025DPM\024b12\023BHTCLR\022XAEN\021NHR" \
108 "\020ICE\017DCE\016ILOCK\015DLOCK\014ICFI\013DCFI\012SPD\011XBSEN" \
109 "\010SGE\007b25\006BTIC\005LRSTK\004FOLD\003BHT\002NOPDST\001NOPTI"
110
111#define HID0_970_BITMASK "\020" \
112 "\040EMCP"
113
114#define HID0_970_BITMASK_U "\020" \
115 "\040ONEPPC\036DOSNGL\036ISYNCSC\035SERGP\034res\033res\032res\031DEEPNAP" \
116 "\030DOZE\027NAP\026res\025DPM\024res\023TG\022HNGDIS\021NHR" \
117 "\020INORDER\017res\016TBCTRL\015EXTBEN\014res\013res\012CIABREN\011HDICEEN" \
118 "\001ENATTN"
119/*
120 * HID0 bit definitions per CPU model
121 *
122 * bit 603 604 750 7400 7410 7450
123 * 0 EMCP EMCP EMCP EMCP EMCP -
124 * 1 - ECP DBP - - -
125 * 2 EBA EBA EBA EBA EDA -
126 * 3 EBD EBD EBD EBD EBD -
127 * 4 SBCLK - BCLK BCKL BCLK -
128 * 5 EICE - - - - TBEN
129 * 6 ECLK - ECLK ECLK ECLK -
130 * 7 PAR PAR PAR PAR PAR STEN
131 * 8 DOZE - DOZE DOZE DOZE HIGH_BAT_EN
132 * 9 NAP - NAP NAP NAP NAP
133 * 10 SLEEP - SLEEP SLEEP SLEEP SLEEP
134 * 11 DPM - DPM DPM DPM DPM
135 * 12 RISEG - - RISEG - -
136 * 13 - - - EIEC EIEC BHTCLR
137 * 14 - - - - - XAEN
138 * 15 - NHR NHR NHR NHR NHR
139 * 16 ICE ICE ICE ICE ICE ICE
140 * 17 DCE DCE DCE DCE DCE DCE
141 * 18 ILOCK ILOCK ILOCK ILOCK ILOCK ILOCK
142 * 19 DLOCK DLOCK DLOCK DLOCK DLOCK DLOCK
143 * 20 ICFI ICFI ICFI ICFI ICFI ICFI
144 * 21 DCFI DCFI DCFI DCFI DCFI DCFI
145 * 22 - - SPD SPD SPG SPD
146 * 23 - - IFEM IFTT IFTT XBSEN
147 * 24 - SIE SGE SGE SGE SGE
148 * 25 - - DCFA DCFA DCFA -
149 * 26 - - BTIC BTIC BTIC BTIC
150 * 27 FBIOB - - - - LRSTK
151 * 28 - - ABE - - FOLD
152 * 29 - BHT BHT BHT BHT BHT
153 * 30 - BTCD - NOPDST NOPDST NOPDST
154 * 31 NOOPTI - NOOPTI NOPTI NOPTI NOPTI
155 *
156 * 604: ECP = Enable cache parity checking
157 * 604: SIE = Serial instruction execution disable
158 * 604: BTCD = Branch target address cache disable
159 * 7450: TBEN = Time Base Enable
160 * 7450: STEN = Software table lookup enable
161 * 7450: BHTCLR = Branch history clear
162 * 7450: LRSTK = Link Register Stack Enable
163 * 7450: FOLD = Branch folding enable
164 */
165
166#define HID1_EMCP 0x80000000 /* Machine Check Signal Enable */
167#define HID1_EBA 0x20000000 /* Enable/Disable 60x/MPX Bus Address
168 Parity Checking */
169#define HID1_EBD 0x10000000 /* Enable/Disable 60x/MPX Bus Data
170 Parity Checking */
171#define HID1_BCLK 0x08000000 /* CLK_OUT */
172#define HID1_ECLK 0x02000000 /* CLK_OUT */
173#define HID1_PAR 0x01000000 /* Disable Precharge for ... */
174#define HID1_DFS4 0x00800000 /* Dynamic Freq Switch / 4 (7448) */
175#define HID1_DFS2 0x00400000 /* Dynamic Freq Switch / 2 (7447A) */
176#define HID1_SYNCBE 0x00000800 /* Enable sync/eieio broadcast */
177#define HID1_ABE 0x00000400 /* Enable address broadcast */
178
179/* PPC970 HID4 */
180#define HID4_RMLR0 0x0000000000000020 /* real mode limit bit 0 */
181#define HID4_RMLR1 0x4000000000000000 /* real mode limit bit 1 */
182#define HID4_RMLR2 0x2000000000000000 /* real mode limit bit 2 */
183/*
184 * real mode limit bits 012
185 * 011 - 64MB
186 * 111 - 128MB
187 * 100 - 256MB
188 * x10 - 1GB
189 * x01 - 16GB
190 * 000 - 256GB
191 */
192
193#endif /* _POWERPC_OEA_HID_H_ */