master
1/* $NetBSD: if_ether.h,v 1.89 2022/06/20 08:14:48 yamaguchi Exp $ */
2
3/*
4 * Copyright (c) 1982, 1986, 1993
5 * The Regents of the University of California. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of the University nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * SUCH DAMAGE.
30 *
31 * @(#)if_ether.h 8.1 (Berkeley) 6/10/93
32 */
33
34#ifndef _NET_IF_ETHER_H_
35#define _NET_IF_ETHER_H_
36
37#ifdef _KERNEL
38#ifdef _KERNEL_OPT
39#include "opt_mbuftrace.h"
40#endif
41#include <sys/mbuf.h>
42#endif
43
44#ifndef _STANDALONE
45#include <net/if.h>
46#endif
47
48/*
49 * Some basic Ethernet constants.
50 */
51#define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
52#define ETHER_TYPE_LEN 2 /* length of the Ethernet type field */
53#define ETHER_CRC_LEN 4 /* length of the Ethernet CRC */
54#define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN)
55#define ETHER_MIN_LEN 64 /* minimum frame length, including CRC */
56#define ETHER_MAX_LEN 1518 /* maximum frame length, including CRC */
57#define ETHER_MAX_LEN_JUMBO 9018 /* maximum jumbo frame len, including CRC */
58
59/*
60 * Some Ethernet extensions.
61 */
62#define ETHER_VLAN_ENCAP_LEN 4 /* length of 802.1Q VLAN encapsulation */
63#define EVL_VLANOFTAG(tag) ((tag) & 4095) /* VLAN ID */
64#define EVL_PRIOFTAG(tag) (((tag) >> 13) & 7) /* Priority */
65#define EVL_CFIOFTAG(tag) (((tag) >> 12) & 1) /* CFI */
66#define ETHER_PPPOE_ENCAP_LEN 8 /* length of PPPoE encapsulation */
67
68/*
69 * Mbuf adjust factor to force 32-bit alignment of IP header.
70 * Drivers should do m_adj(m, ETHER_ALIGN) when setting up a
71 * receive so the upper layers get the IP header properly aligned
72 * past the 14-byte Ethernet header.
73 */
74#define ETHER_ALIGN 2 /* driver adjust for IP hdr alignment */
75
76/*
77 * Ethernet address - 6 octets
78 * this is only used by the ethers(3) functions.
79 */
80struct ether_addr {
81 uint8_t ether_addr_octet[ETHER_ADDR_LEN];
82};
83
84/*
85 * Structure of a 10Mb/s Ethernet header.
86 */
87struct ether_header {
88 uint8_t ether_dhost[ETHER_ADDR_LEN];
89 uint8_t ether_shost[ETHER_ADDR_LEN];
90 uint16_t ether_type;
91};
92
93#include <net/ethertypes.h>
94
95#define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
96#define ETHER_IS_LOCAL(addr) (*(addr) & 0x02) /* is address local? */
97
98#define ETHERMTU_JUMBO (ETHER_MAX_LEN_JUMBO - ETHER_HDR_LEN - ETHER_CRC_LEN)
99#define ETHERMTU (ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
100#define ETHERMIN (ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN)
101
102/*
103 * Compute the maximum frame size based on ethertype (i.e. possible
104 * encapsulation) and whether or not an FCS is present.
105 */
106#define ETHER_MAX_FRAME(ifp, etype, hasfcs) \
107 ((ifp)->if_mtu + ETHER_HDR_LEN + \
108 ((hasfcs) ? ETHER_CRC_LEN : 0) + \
109 (((etype) == ETHERTYPE_VLAN) ? ETHER_VLAN_ENCAP_LEN : 0) + \
110 (((etype) == ETHERTYPE_PPPOE) ? ETHER_PPPOE_ENCAP_LEN : 0))
111
112/*
113 * Ethernet CRC32 polynomials (big- and little-endian verions).
114 */
115#define ETHER_CRC_POLY_LE 0xedb88320
116#define ETHER_CRC_POLY_BE 0x04c11db6
117
118#ifndef _STANDALONE
119
120/*
121 * Ethernet-specific mbuf flags.
122 */
123#define M_HASFCS M_LINK0 /* FCS included at end of frame */
124#define M_PROMISC M_LINK1 /* this packet is not for us */
125
126#ifdef _KERNEL
127/*
128 * Macro to map an IP multicast address to an Ethernet multicast address.
129 * The high-order 25 bits of the Ethernet address are statically assigned,
130 * and the low-order 23 bits are taken from the low end of the IP address.
131 */
132#define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \
133 /* const struct in_addr *ipaddr; */ \
134 /* uint8_t enaddr[ETHER_ADDR_LEN]; */ \
135do { \
136 (enaddr)[0] = 0x01; \
137 (enaddr)[1] = 0x00; \
138 (enaddr)[2] = 0x5e; \
139 (enaddr)[3] = ((const uint8_t *)ipaddr)[1] & 0x7f; \
140 (enaddr)[4] = ((const uint8_t *)ipaddr)[2]; \
141 (enaddr)[5] = ((const uint8_t *)ipaddr)[3]; \
142} while (/*CONSTCOND*/0)
143/*
144 * Macro to map an IP6 multicast address to an Ethernet multicast address.
145 * The high-order 16 bits of the Ethernet address are statically assigned,
146 * and the low-order 32 bits are taken from the low end of the IP6 address.
147 */
148#define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr) \
149 /* struct in6_addr *ip6addr; */ \
150 /* uint8_t enaddr[ETHER_ADDR_LEN]; */ \
151{ \
152 (enaddr)[0] = 0x33; \
153 (enaddr)[1] = 0x33; \
154 (enaddr)[2] = ((const uint8_t *)ip6addr)[12]; \
155 (enaddr)[3] = ((const uint8_t *)ip6addr)[13]; \
156 (enaddr)[4] = ((const uint8_t *)ip6addr)[14]; \
157 (enaddr)[5] = ((const uint8_t *)ip6addr)[15]; \
158}
159#endif
160
161struct mii_data;
162
163struct ethercom;
164
165typedef int (*ether_cb_t)(struct ethercom *);
166typedef int (*ether_vlancb_t)(struct ethercom *, uint16_t, bool);
167
168/*
169 * Structure shared between the ethernet driver modules and
170 * the multicast list code. For example, each ec_softc or il_softc
171 * begins with this structure.
172 */
173struct ethercom {
174 struct ifnet ec_if; /* network-visible interface */
175 LIST_HEAD(, ether_multi) ec_multiaddrs; /* list of ether multicast
176 addrs */
177 int ec_multicnt; /* length of ec_multiaddrs
178 list */
179 int ec_capabilities; /* capabilities, provided by
180 driver */
181 int ec_capenable; /* tells hardware which
182 capabilities to enable */
183
184 int ec_nvlans; /* # VLANs on this interface */
185 SIMPLEQ_HEAD(, vlanid_list) ec_vids; /* list of VLAN IDs */
186 /* The device handle for the MII bus child device. */
187 struct mii_data *ec_mii;
188 struct ifmedia *ec_ifmedia;
189 /*
190 * Called after a change to ec_if.if_flags. Returns
191 * ENETRESET if the device should be reinitialized with
192 * ec_if.if_init, 0 on success, not 0 on failure.
193 */
194 ether_cb_t ec_ifflags_cb;
195 /*
196 * Called whenever a vlan interface is configured or unconfigured.
197 * Args include the vlan tag and a flag indicating whether the tag is
198 * being added or removed.
199 */
200 ether_vlancb_t ec_vlan_cb;
201 /* Hooks called at the beginning of detach of this interface */
202 khook_list_t *ec_ifdetach_hooks;
203 kmutex_t *ec_lock;
204 /* Flags used only by the kernel */
205 int ec_flags;
206#ifdef MBUFTRACE
207 struct mowner ec_rx_mowner; /* mbufs received */
208 struct mowner ec_tx_mowner; /* mbufs transmitted */
209#endif
210};
211
212#define ETHERCAP_VLAN_MTU 0x00000001 /* VLAN-compatible MTU */
213#define ETHERCAP_VLAN_HWTAGGING 0x00000002 /* hardware VLAN tag support */
214#define ETHERCAP_JUMBO_MTU 0x00000004 /* 9000 byte MTU supported */
215#define ETHERCAP_VLAN_HWFILTER 0x00000008 /* iface hw can filter vlan tag */
216#define ETHERCAP_EEE 0x00000010 /* Energy Efficiency Ethernet */
217#define ETHERCAP_MASK 0x0000001f
218
219#define ECCAPBITS \
220 "\020" \
221 "\1VLAN_MTU" \
222 "\2VLAN_HWTAGGING" \
223 "\3JUMBO_MTU" \
224 "\4VLAN_HWFILTER" \
225 "\5EEE"
226
227/* ioctl() for Ethernet capabilities */
228struct eccapreq {
229 char eccr_name[IFNAMSIZ]; /* if name, e.g. "en0" */
230 int eccr_capabilities; /* supported capabiliites */
231 int eccr_capenable; /* capabilities enabled */
232};
233
234/* sysctl for Ethernet multicast addresses */
235struct ether_multi_sysctl {
236 u_int enm_refcount;
237 uint8_t enm_addrlo[ETHER_ADDR_LEN];
238 uint8_t enm_addrhi[ETHER_ADDR_LEN];
239};
240
241#ifdef _KERNEL
242/*
243 * Flags for ec_flags
244 */
245/* Store IFF_ALLMULTI in ec_flags instead of if_flags to avoid data races. */
246#define ETHER_F_ALLMULTI __BIT(0)
247
248extern const uint8_t etherbroadcastaddr[ETHER_ADDR_LEN];
249extern const uint8_t ethermulticastaddr_slowprotocols[ETHER_ADDR_LEN];
250extern const uint8_t ether_ipmulticast_min[ETHER_ADDR_LEN];
251extern const uint8_t ether_ipmulticast_max[ETHER_ADDR_LEN];
252
253void ether_set_ifflags_cb(struct ethercom *, ether_cb_t);
254void ether_set_vlan_cb(struct ethercom *, ether_vlancb_t);
255int ether_ioctl(struct ifnet *, u_long, void *);
256int ether_addmulti(const struct sockaddr *, struct ethercom *);
257int ether_delmulti(const struct sockaddr *, struct ethercom *);
258int ether_multiaddr(const struct sockaddr *, uint8_t[], uint8_t[]);
259void ether_input(struct ifnet *, struct mbuf *);
260
261/*
262 * Ethernet multicast address structure. There is one of these for each
263 * multicast address or range of multicast addresses that we are supposed
264 * to listen to on a particular interface. They are kept in a linked list,
265 * rooted in the interface's ethercom structure.
266 */
267struct ether_multi {
268 uint8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */
269 uint8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */
270 u_int enm_refcount; /* no. claims to this addr/range */
271 LIST_ENTRY(ether_multi) enm_list;
272};
273
274/*
275 * Structure used by macros below to remember position when stepping through
276 * all of the ether_multi records.
277 */
278struct ether_multistep {
279 struct ether_multi *e_enm;
280};
281
282/*
283 * lookup the ether_multi record for a given range of Ethernet
284 * multicast addresses connected to a given ethercom structure.
285 * If no matching record is found, NULL is returned.
286 */
287static __inline struct ether_multi *
288ether_lookup_multi(const uint8_t *addrlo, const uint8_t *addrhi,
289 const struct ethercom *ec)
290{
291 struct ether_multi *enm;
292
293 LIST_FOREACH(enm, &ec->ec_multiaddrs, enm_list) {
294 if (memcmp(enm->enm_addrlo, addrlo, ETHER_ADDR_LEN) != 0)
295 continue;
296 if (memcmp(enm->enm_addrhi, addrhi, ETHER_ADDR_LEN) != 0)
297 continue;
298
299 break;
300 }
301
302 return enm;
303}
304
305/*
306 * step through all of the ether_multi records, one at a time.
307 * The current position is remembered in "step", which the caller must
308 * provide. ether_first_multi(), below, must be called to initialize "step"
309 * and get the first record. Both functions return a NULL when there
310 * are no remaining records.
311 */
312static __inline struct ether_multi *
313ether_next_multi(struct ether_multistep *step)
314{
315 struct ether_multi *enm;
316
317 enm = step->e_enm;
318 if (enm != NULL)
319 step->e_enm = LIST_NEXT(enm, enm_list);
320
321 return enm;
322}
323#define ETHER_NEXT_MULTI(step, enm) \
324 /* struct ether_multistep step; */ \
325 /* struct ether_multi *enm; */ \
326 (enm) = ether_next_multi(&(step))
327
328static __inline struct ether_multi *
329ether_first_multi(struct ether_multistep *step, const struct ethercom *ec)
330{
331
332 step->e_enm = LIST_FIRST(&ec->ec_multiaddrs);
333
334 return ether_next_multi(step);
335}
336
337#define ETHER_FIRST_MULTI(step, ec, enm) \
338 /* struct ether_multistep step; */ \
339 /* struct ethercom *ec; */ \
340 /* struct ether_multi *enm; */ \
341 (enm) = ether_first_multi(&(step), (ec))
342
343#define ETHER_LOCK(ec) mutex_enter((ec)->ec_lock)
344#define ETHER_UNLOCK(ec) mutex_exit((ec)->ec_lock)
345
346/*
347 * Ethernet 802.1Q VLAN structures.
348 */
349
350/* for ethercom */
351struct vlanid_list {
352 uint16_t vid;
353 SIMPLEQ_ENTRY(vlanid_list) vid_list;
354};
355
356/* add VLAN tag to input/received packet */
357static __inline void
358vlan_set_tag(struct mbuf *m, uint16_t vlantag)
359{
360 /* VLAN tag contains priority, CFI and VLAN ID */
361 KASSERT((m->m_flags & M_PKTHDR) != 0);
362 m->m_pkthdr.ether_vtag = vlantag;
363 m->m_flags |= M_VLANTAG;
364 return;
365}
366
367/* extract VLAN ID value from a VLAN tag */
368static __inline uint16_t
369vlan_get_tag(struct mbuf *m)
370{
371 KASSERT((m->m_flags & M_PKTHDR) != 0);
372 KASSERT(m->m_flags & M_VLANTAG);
373 return m->m_pkthdr.ether_vtag;
374}
375
376static __inline bool
377vlan_has_tag(struct mbuf *m)
378{
379 return (m->m_flags & M_VLANTAG) != 0;
380}
381
382static __inline bool
383vlan_is_hwtag_enabled(struct ifnet *_ifp)
384{
385 struct ethercom *ec = (void *)_ifp;
386
387 if (ec->ec_capenable & ETHERCAP_VLAN_HWTAGGING)
388 return true;
389
390 return false;
391}
392
393/* test if any VLAN is configured for this interface */
394#define VLAN_ATTACHED(ec) ((ec)->ec_nvlans > 0)
395
396void etherinit(void);
397void ether_ifattach(struct ifnet *, const uint8_t *);
398void ether_ifdetach(struct ifnet *);
399int ether_mediachange(struct ifnet *);
400void ether_mediastatus(struct ifnet *, struct ifmediareq *);
401void * ether_ifdetachhook_establish(struct ifnet *,
402 void (*)(void *), void *arg);
403void ether_ifdetachhook_disestablish(struct ifnet *,
404 void *, kmutex_t *);
405
406char *ether_sprintf(const uint8_t *);
407char *ether_snprintf(char *, size_t, const uint8_t *);
408
409uint32_t ether_crc32_le(const uint8_t *, size_t);
410uint32_t ether_crc32_be(const uint8_t *, size_t);
411
412int ether_aton_r(u_char *, size_t, const char *);
413int ether_enable_vlan_mtu(struct ifnet *);
414int ether_disable_vlan_mtu(struct ifnet *);
415int ether_add_vlantag(struct ifnet *, uint16_t, bool *);
416int ether_del_vlantag(struct ifnet *, uint16_t);
417int ether_inject_vlantag(struct mbuf **, uint16_t, uint16_t);
418struct mbuf *
419 ether_strip_vlantag(struct mbuf *);
420#else
421/*
422 * Prototype ethers(3) functions.
423 */
424#include <sys/cdefs.h>
425__BEGIN_DECLS
426char * ether_ntoa(const struct ether_addr *);
427struct ether_addr *
428 ether_aton(const char *);
429int ether_ntohost(char *, const struct ether_addr *);
430int ether_hostton(const char *, struct ether_addr *);
431int ether_line(const char *, struct ether_addr *, char *);
432__END_DECLS
433#endif
434
435#endif /* _STANDALONE */
436
437#endif /* !_NET_IF_ETHER_H_ */