master
1/* $NetBSD: chio.h,v 1.9 1997/09/29 17:32:26 mjacob Exp $ */
2
3/*-
4 * SPDX-License-Identifier: BSD-4-Clause
5 *
6 * Copyright (c) 1996 Jason R. Thorpe <thorpej@and.com>
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgements:
19 * This product includes software developed by Jason R. Thorpe
20 * for And Communications, http://www.and.com/
21 * 4. The name of the author may not be used to endorse or promote products
22 * derived from this software without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
25 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 */
36
37#ifndef _SYS_CHIO_H_
38#define _SYS_CHIO_H_
39
40#ifndef _KERNEL
41#include <sys/types.h>
42#endif
43#include <sys/ioccom.h>
44
45/*
46 * Element types. Used as "to" and "from" type indicators in move
47 * and exchange operations.
48 *
49 * Note that code in sys/scsi/ch.c relies on these values (uses them
50 * as offsets in an array, and other evil), so don't muck with them
51 * unless you know what you're doing.
52 */
53#define CHET_MT 0 /* medium transport (picker) */
54#define CHET_ST 1 /* storage transport (slot) */
55#define CHET_IE 2 /* import/export (portal) */
56#define CHET_DT 3 /* data transfer (drive) */
57#define CHET_MAX CHET_DT
58
59/*
60 * Maximum length of a volume identification string
61 */
62#define CH_VOLTAG_MAXLEN 32
63
64/*
65 * Structure used to execute a MOVE MEDIUM command.
66 */
67struct changer_move {
68 u_int16_t cm_fromtype; /* element type to move from */
69 u_int16_t cm_fromunit; /* logical unit of from element */
70 u_int16_t cm_totype; /* element type to move to */
71 u_int16_t cm_tounit; /* logical unit of to element */
72 u_int16_t cm_flags; /* misc. flags */
73};
74
75/* cm_flags */
76#define CM_INVERT 0x01 /* invert media */
77
78/*
79 * Structure used to execute an EXCHANGE MEDIUM command. In an
80 * exchange operation, the following steps occur:
81 *
82 * - media from source is moved to first destination.
83 *
84 * - media previously occupying first destination is moved
85 * to the second destination.
86 *
87 * The second destination may or may not be the same as the source.
88 * In the case of a simple exchange, the source and second destination
89 * are the same.
90 */
91struct changer_exchange {
92 u_int16_t ce_srctype; /* element type of source */
93 u_int16_t ce_srcunit; /* logical unit of source */
94 u_int16_t ce_fdsttype; /* element type of first destination */
95 u_int16_t ce_fdstunit; /* logical unit of first destination */
96 u_int16_t ce_sdsttype; /* element type of second destination */
97 u_int16_t ce_sdstunit; /* logical unit of second destination */
98 u_int16_t ce_flags; /* misc. flags */
99};
100
101/* ce_flags */
102#define CE_INVERT1 0x01 /* invert media 1 */
103#define CE_INVERT2 0x02 /* invert media 2 */
104
105/*
106 * Structure used to execute a POSITION TO ELEMENT command. This
107 * moves the current picker in front of the specified element.
108 */
109struct changer_position {
110 u_int16_t cp_type; /* element type */
111 u_int16_t cp_unit; /* logical unit of element */
112 u_int16_t cp_flags; /* misc. flags */
113};
114
115/* cp_flags */
116#define CP_INVERT 0x01 /* invert picker */
117
118/*
119 * Data returned by CHIOGPARAMS.
120 */
121struct changer_params {
122 u_int16_t cp_npickers; /* number of pickers */
123 u_int16_t cp_nslots; /* number of slots */
124 u_int16_t cp_nportals; /* number of import/export portals */
125 u_int16_t cp_ndrives; /* number of drives */
126};
127
128/*
129 * Command used to get element status.
130 */
131
132struct changer_voltag {
133 u_char cv_volid[CH_VOLTAG_MAXLEN+1];
134 u_int16_t cv_serial;
135};
136
137typedef struct changer_voltag changer_voltag_t;
138
139/*
140 * Flags definitions for ces_status
141 * Not all flags have meaning for all element types.
142 */
143typedef enum {
144 CES_STATUS_FULL = 0x001, /* element is full */
145 CES_STATUS_IMPEXP = 0x002, /* media deposited by operator */
146 CES_STATUS_EXCEPT = 0x004, /* element in abnormal state */
147 CES_PICKER_MASK = 0x005, /* flags valid for pickers */
148 CES_STATUS_ACCESS = 0x008, /* media accessible by picker */
149 CES_SLOT_MASK = 0x00c, /* flags valid for slots */
150 CES_DRIVE_MASK = 0x00c, /* flags valid for drives */
151 CES_STATUS_EXENAB = 0x010, /* element supports exporting */
152 CES_STATUS_INENAB = 0x020, /* element supports importing */
153 CES_PORTAL_MASK = 0x03f, /* flags valid for portals */
154 CES_INVERT = 0x040, /* invert bit */
155 CES_SOURCE_VALID = 0x080, /* source address (ces_source) valid */
156 CES_SCSIID_VALID = 0x100, /* ces_scsi_id is valid */
157 CES_LUN_VALID = 0x200, /* ces_scsi_lun is valid */
158 CES_PIV = 0x400 /* ces_protocol_id is valid */
159} ces_status_flags;
160
161struct changer_element_status {
162 u_int8_t ces_type; /* element type */
163 u_int16_t ces_addr; /* logical element address */
164 u_int16_t ces_int_addr; /* changer element address */
165 ces_status_flags ces_flags; /*
166 * see CESTATUS definitions
167 * below
168 */
169 u_int8_t ces_sensecode; /*
170 * additional sense
171 * code for element */
172 u_int8_t ces_sensequal; /*
173 * additional sense
174 * code qualifier
175 */
176 u_int8_t ces_source_type; /*
177 * element type of
178 * source address
179 */
180 u_int16_t ces_source_addr; /*
181 * source address of medium
182 */
183 changer_voltag_t ces_pvoltag; /* primary volume tag */
184 changer_voltag_t ces_avoltag; /* alternate volume tag */
185 u_int8_t ces_scsi_id; /* SCSI id of element */
186 u_int8_t ces_scsi_lun; /* SCSI lun of element */
187
188 /*
189 * Data members for SMC3 and later versions
190 */
191 u_int8_t ces_medium_type;
192#define CES_MEDIUM_TYPE_UNKNOWN 0 /* Medium type unspecified */
193#define CES_MEDIUM_TYPE_DATA 1 /* Data medium */
194#define CES_MEDIUM_TYPE_CLEANING 2 /* Cleaning medium */
195#define CES_MEDIUM_TYPE_DIAGNOSTIC 3 /* Diagnostic medium */
196#define CES_MEDIUM_TYPE_WORM 4 /* WORM medium */
197#define CES_MEDIUM_TYPE_MICROCODE 5 /* Microcode image medium */
198
199 u_int8_t ces_protocol_id;
200#define CES_PROTOCOL_ID_FCP_4 0 /* Fiber channel */
201#define CES_PROTOCOL_ID_SPI_5 1 /* Parallel SCSI */
202#define CES_PROTOCOL_ID_SSA_S3P 2 /* SSA */
203#define CES_PROTOCOL_ID_SBP_3 3 /* IEEE 1394 */
204#define CES_PROTOCOL_ID_SRP 4 /* SCSI Remote DMA */
205#define CES_PROTOCOL_ID_ISCSI 5 /* iSCSI */
206#define CES_PROTOCOL_ID_SPL 6 /* SAS */
207#define CES_PROTOCOL_ID_ADT_2 7 /* Automation/Drive Interface */
208#define CES_PROTOCOL_ID_ACS_2 8 /* ATA */
209
210 u_int8_t ces_assoc;
211#define CES_ASSOC_LOGICAL_UNIT 0
212#define CES_ASSOC_TARGET_PORT 1
213#define CES_ASSOC_TARGET_DEVICE 2
214
215 u_int8_t ces_designator_type;
216#define CES_DESIGNATOR_TYPE_VENDOR_SPECIFIC 0
217#define CES_DESIGNATOR_TYPE_T10_VENDOR_ID 1
218#define CES_DESIGNATOR_TYPE_EUI_64 2
219#define CES_DESIGNATOR_TYPE_NAA 3
220#define CES_DESIGNATOR_TYPE_TARGET_PORT_ID 4
221#define CES_DESIGNATOR_TYPE_TARGET_PORT_GRP 5
222#define CES_DESIGNATOR_TYPE_LOGICAL_UNIT_GRP 6
223#define CES_DESIGNATOR_TYPE_MD5_LOGICAL_UNIT_ID 7
224#define CES_DESIGNATOR_TYPE_SCSI_NAME_STRING 8
225
226 u_int8_t ces_code_set;
227#define CES_CODE_SET_RESERVED 0
228#define CES_CODE_SET_BINARY 1
229#define CES_CODE_SET_ASCII 2
230#define CES_CODE_SET_UTF_8 3
231
232 u_int8_t ces_designator_length;
233
234#define CES_MAX_DESIGNATOR_LENGTH (1 << 8)
235 u_int8_t ces_designator[CES_MAX_DESIGNATOR_LENGTH + 1];
236};
237
238struct changer_element_status_request {
239 u_int16_t cesr_element_type;
240 u_int16_t cesr_element_base;
241 u_int16_t cesr_element_count;
242
243 u_int16_t cesr_flags;
244#define CESR_VOLTAGS 0x01
245
246 struct changer_element_status *cesr_element_status;
247};
248
249struct changer_set_voltag_request {
250 u_int16_t csvr_type;
251 u_int16_t csvr_addr;
252
253 u_int16_t csvr_flags;
254#define CSVR_MODE_MASK 0x0f /* mode mask, acceptable modes below: */
255#define CSVR_MODE_SET 0x00 /* set volume tag if not set */
256#define CSVR_MODE_REPLACE 0x01 /* unconditionally replace volume tag */
257#define CSVR_MODE_CLEAR 0x02 /* clear volume tag */
258
259#define CSVR_ALTERNATE 0x10 /* set to work with alternate voltag */
260
261 changer_voltag_t csvr_voltag;
262};
263
264#define CESTATUS_BITS \
265 "\20\6INENAB\5EXENAB\4ACCESS\3EXCEPT\2IMPEXP\1FULL"
266
267#define CHIOMOVE _IOW('c', 0x01, struct changer_move)
268#define CHIOEXCHANGE _IOW('c', 0x02, struct changer_exchange)
269#define CHIOPOSITION _IOW('c', 0x03, struct changer_position)
270#define CHIOGPICKER _IOR('c', 0x04, int)
271#define CHIOSPICKER _IOW('c', 0x05, int)
272#define CHIOGPARAMS _IOR('c', 0x06, struct changer_params)
273#define CHIOIELEM _IOW('c', 0x07, u_int32_t)
274#define OCHIOGSTATUS _IOW('c', 0x08, struct changer_element_status_request)
275#define CHIOSETVOLTAG _IOW('c', 0x09, struct changer_set_voltag_request)
276#define CHIOGSTATUS _IOW('c', 0x0A, struct changer_element_status_request)
277
278#endif /* !_SYS_CHIO_H_ */