1/*-
   2 * SPDX-License-Identifier: BSD-2-Clause
   3 *
   4 * Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
   5 *
   6 * Redistribution and use in source and binary forms, with or without
   7 * modification, are permitted provided that the following conditions
   8 * are met:
   9 * 1. Redistributions of source code must retain the above copyright
  10 *    notice, this list of conditions and the following disclaimer.
  11 * 2. Redistributions in binary form must reproduce the above copyright
  12 *    notice, this list of conditions and the following disclaimer in the
  13 *    documentation and/or other materials provided with the distribution.
  14 *
  15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  25 * SUCH DAMAGE.
  26 */
  27
  28#ifndef _IPFW2_H
  29#define _IPFW2_H
  30
  31/*
  32 * The default rule number.  By the design of ip_fw, the default rule
  33 * is the last one, so its number can also serve as the highest number
  34 * allowed for a rule.  The ip_fw code relies on both meanings of this
  35 * constant.
  36 */
  37#define	IPFW_DEFAULT_RULE	65535
  38
  39#define	RESVD_SET		31	/*set for default and persistent rules*/
  40#define	IPFW_MAX_SETS		32	/* Number of sets supported by ipfw*/
  41
  42/*
  43 * Compat values for old clients
  44 */
  45#ifndef	_KERNEL
  46#define	IPFW_TABLES_MAX		65535
  47#define	IPFW_TABLES_DEFAULT	128
  48#endif
  49
  50/*
  51 * Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
  52 * argument between 1 and 65534. The value 0 (IP_FW_TARG) is used
  53 * to represent 'tablearg' value, e.g.  indicate the use of a 'tablearg'
  54 * result of the most recent table() lookup.
  55 * Note that 16bit is only a historical limit, resulting from
  56 * the use of a 16-bit fields for that value. In reality, we can have
  57 * 2^32 pipes, queues, tag values and so on.
  58 */
  59#define	IPFW_ARG_MIN		1
  60#define	IPFW_ARG_MAX		65534
  61#define IP_FW_TABLEARG		65535	/* Compat value for old clients */
  62#define	IP_FW_TARG		0	/* Current tablearg value */
  63#define	IP_FW_NAT44_GLOBAL	65535	/* arg1 value for "nat global" */
  64
  65/*
  66 * Number of entries in the call stack of the call/return commands.
  67 * Call stack currently is an uint16_t array with rule numbers.
  68 */
  69#define	IPFW_CALLSTACK_SIZE	16
  70
  71/* IP_FW3 header/opcodes */
  72typedef struct _ip_fw3_opheader {
  73	uint16_t opcode;	/* Operation opcode */
  74	uint16_t version;	/* Opcode version */
  75	uint16_t reserved[2];	/* Align to 64-bit boundary */
  76} ip_fw3_opheader;
  77
  78/* IP_FW3 opcodes */
  79#define	IP_FW_TABLE_XADD	86	/* add entry */
  80#define	IP_FW_TABLE_XDEL	87	/* delete entry */
  81#define	IP_FW_TABLE_XGETSIZE	88	/* get table size (deprecated) */
  82#define	IP_FW_TABLE_XLIST	89	/* list table contents */
  83#define	IP_FW_TABLE_XDESTROY	90	/* destroy table */
  84#define	IP_FW_TABLES_XLIST	92	/* list all tables  */
  85#define	IP_FW_TABLE_XINFO	93	/* request info for one table */
  86#define	IP_FW_TABLE_XFLUSH	94	/* flush table data */
  87#define	IP_FW_TABLE_XCREATE	95	/* create new table  */
  88#define	IP_FW_TABLE_XMODIFY	96	/* modify existing table */
  89#define	IP_FW_XGET		97	/* Retrieve configuration */
  90#define	IP_FW_XADD		98	/* add rule */
  91#define	IP_FW_XDEL		99	/* del rule */
  92#define	IP_FW_XMOVE		100	/* move rules to different set  */
  93#define	IP_FW_XZERO		101	/* clear accounting */
  94#define	IP_FW_XRESETLOG		102	/* zero rules logs */
  95#define	IP_FW_SET_SWAP		103	/* Swap between 2 sets */
  96#define	IP_FW_SET_MOVE		104	/* Move one set to another one */
  97#define	IP_FW_SET_ENABLE	105	/* Enable/disable sets */
  98#define	IP_FW_TABLE_XFIND	106	/* finds an entry */
  99#define	IP_FW_XIFLIST		107	/* list tracked interfaces */
 100#define	IP_FW_TABLES_ALIST	108	/* list table algorithms */
 101#define	IP_FW_TABLE_XSWAP	109	/* swap two tables */
 102#define	IP_FW_TABLE_VLIST	110	/* dump table value hash */
 103
 104#define	IP_FW_NAT44_XCONFIG	111	/* Create/modify NAT44 instance */
 105#define	IP_FW_NAT44_DESTROY	112	/* Destroys NAT44 instance */
 106#define	IP_FW_NAT44_XGETCONFIG	113	/* Get NAT44 instance config */
 107#define	IP_FW_NAT44_LIST_NAT	114	/* List all NAT44 instances */
 108#define	IP_FW_NAT44_XGETLOG	115	/* Get log from NAT44 instance */
 109
 110#define	IP_FW_DUMP_SOPTCODES	116	/* Dump available sopts/versions */
 111#define	IP_FW_DUMP_SRVOBJECTS	117	/* Dump existing named objects */
 112
 113#define	IP_FW_NAT64STL_CREATE	130	/* Create stateless NAT64 instance */
 114#define	IP_FW_NAT64STL_DESTROY	131	/* Destroy stateless NAT64 instance */
 115#define	IP_FW_NAT64STL_CONFIG	132	/* Modify stateless NAT64 instance */
 116#define	IP_FW_NAT64STL_LIST	133	/* List stateless NAT64 instances */
 117#define	IP_FW_NAT64STL_STATS	134	/* Get NAT64STL instance statistics */
 118#define	IP_FW_NAT64STL_RESET_STATS 135	/* Reset NAT64STL instance statistics */
 119
 120#define	IP_FW_NAT64LSN_CREATE	140	/* Create stateful NAT64 instance */
 121#define	IP_FW_NAT64LSN_DESTROY	141	/* Destroy stateful NAT64 instance */
 122#define	IP_FW_NAT64LSN_CONFIG	142	/* Modify stateful NAT64 instance */
 123#define	IP_FW_NAT64LSN_LIST	143	/* List stateful NAT64 instances */
 124#define	IP_FW_NAT64LSN_STATS	144	/* Get NAT64LSN instance statistics */
 125#define	IP_FW_NAT64LSN_LIST_STATES 145	/* Get stateful NAT64 states */
 126#define	IP_FW_NAT64LSN_RESET_STATS 146	/* Reset NAT64LSN instance statistics */
 127
 128#define	IP_FW_NPTV6_CREATE	150	/* Create NPTv6 instance */
 129#define	IP_FW_NPTV6_DESTROY	151	/* Destroy NPTv6 instance */
 130#define	IP_FW_NPTV6_CONFIG	152	/* Modify NPTv6 instance */
 131#define	IP_FW_NPTV6_LIST	153	/* List NPTv6 instances */
 132#define	IP_FW_NPTV6_STATS	154	/* Get NPTv6 instance statistics */
 133#define	IP_FW_NPTV6_RESET_STATS	155	/* Reset NPTv6 instance statistics */
 134
 135#define	IP_FW_NAT64CLAT_CREATE	160	/* Create clat NAT64 instance */
 136#define	IP_FW_NAT64CLAT_DESTROY	161	/* Destroy clat NAT64 instance */
 137#define	IP_FW_NAT64CLAT_CONFIG	162	/* Modify clat NAT64 instance */
 138#define	IP_FW_NAT64CLAT_LIST	163	/* List clat NAT64 instances */
 139#define	IP_FW_NAT64CLAT_STATS	164	/* Get NAT64CLAT instance statistics */
 140#define	IP_FW_NAT64CLAT_RESET_STATS 165	/* Reset NAT64CLAT instance statistics */
 141
 142/*
 143 * The kernel representation of ipfw rules is made of a list of
 144 * 'instructions' (for all practical purposes equivalent to BPF
 145 * instructions), which specify which fields of the packet
 146 * (or its metadata) should be analysed.
 147 *
 148 * Each instruction is stored in a structure which begins with
 149 * "ipfw_insn", and can contain extra fields depending on the
 150 * instruction type (listed below).
 151 * Note that the code is written so that individual instructions
 152 * have a size which is a multiple of 32 bits. This means that, if
 153 * such structures contain pointers or other 64-bit entities,
 154 * (there is just one instance now) they may end up unaligned on
 155 * 64-bit architectures, so the must be handled with care.
 156 *
 157 * "enum ipfw_opcodes" are the opcodes supported. We can have up
 158 * to 256 different opcodes. When adding new opcodes, they should
 159 * be appended to the end of the opcode list before O_LAST_OPCODE,
 160 * this will prevent the ABI from being broken, otherwise users
 161 * will have to recompile ipfw(8) when they update the kernel.
 162 */
 163
 164enum ipfw_opcodes {		/* arguments (4 byte each)	*/
 165	O_NOP,
 166
 167	O_IP_SRC,		/* u32 = IP			*/
 168	O_IP_SRC_MASK,		/* ip = IP/mask			*/
 169	O_IP_SRC_ME,		/* none				*/
 170	O_IP_SRC_SET,		/* u32=base, arg1=len, bitmap	*/
 171
 172	O_IP_DST,		/* u32 = IP			*/
 173	O_IP_DST_MASK,		/* ip = IP/mask			*/
 174	O_IP_DST_ME,		/* none				*/
 175	O_IP_DST_SET,		/* u32=base, arg1=len, bitmap	*/
 176
 177	O_IP_SRCPORT,		/* (n)port list:mask 4 byte ea	*/
 178	O_IP_DSTPORT,		/* (n)port list:mask 4 byte ea	*/
 179	O_PROTO,		/* arg1=protocol		*/
 180
 181	O_MACADDR2,		/* 2 mac addr:mask		*/
 182	O_MAC_TYPE,		/* same as srcport		*/
 183
 184	O_LAYER2,		/* none				*/
 185	O_IN,			/* none				*/
 186	O_FRAG,			/* none				*/
 187
 188	O_RECV,			/* none				*/
 189	O_XMIT,			/* none				*/
 190	O_VIA,			/* none				*/
 191
 192	O_IPOPT,		/* arg1 = 2*u8 bitmap		*/
 193	O_IPLEN,		/* arg1 = len			*/
 194	O_IPID,			/* arg1 = id			*/
 195
 196	O_IPTOS,		/* arg1 = id			*/
 197	O_IPPRECEDENCE,		/* arg1 = precedence << 5	*/
 198	O_IPTTL,		/* arg1 = TTL			*/
 199
 200	O_IPVER,		/* arg1 = version		*/
 201	O_UID,			/* u32 = id			*/
 202	O_GID,			/* u32 = id			*/
 203	O_ESTAB,		/* none (tcp established)	*/
 204	O_TCPFLAGS,		/* arg1 = 2*u8 bitmap		*/
 205	O_TCPWIN,		/* arg1 = desired win		*/
 206	O_TCPSEQ,		/* u32 = desired seq.		*/
 207	O_TCPACK,		/* u32 = desired seq.		*/
 208	O_ICMPTYPE,		/* u32 = icmp bitmap		*/
 209	O_TCPOPTS,		/* arg1 = 2*u8 bitmap		*/
 210
 211	O_VERREVPATH,		/* none				*/
 212	O_VERSRCREACH,		/* none				*/
 213
 214	O_PROBE_STATE,		/* none				*/
 215	O_KEEP_STATE,		/* none				*/
 216	O_LIMIT,		/* ipfw_insn_limit		*/
 217	O_LIMIT_PARENT,		/* dyn_type, not an opcode.	*/
 218
 219	/*
 220	 * These are really 'actions'.
 221	 */
 222
 223	O_LOG,			/* ipfw_insn_log		*/
 224	O_PROB,			/* u32 = match probability	*/
 225
 226	O_CHECK_STATE,		/* none				*/
 227	O_ACCEPT,		/* none				*/
 228	O_DENY,			/* none 			*/
 229	O_REJECT,		/* arg1=icmp arg (same as deny)	*/
 230	O_COUNT,		/* none				*/
 231	O_SKIPTO,		/* arg1=next rule number	*/
 232	O_PIPE,			/* arg1=pipe number		*/
 233	O_QUEUE,		/* arg1=queue number		*/
 234	O_DIVERT,		/* arg1=port number		*/
 235	O_TEE,			/* arg1=port number		*/
 236	O_FORWARD_IP,		/* fwd sockaddr			*/
 237	O_FORWARD_MAC,		/* fwd mac			*/
 238	O_NAT,                  /* nope                         */
 239	O_REASS,                /* none                         */
 240
 241	/*
 242	 * More opcodes.
 243	 */
 244	O_IPSEC,		/* has ipsec history 		*/
 245	O_IP_SRC_LOOKUP,	/* arg1=table number, u32=value	*/
 246	O_IP_DST_LOOKUP,	/* arg1=table number, u32=value	*/
 247	O_ANTISPOOF,		/* none				*/
 248	O_JAIL,			/* u32 = id			*/
 249	O_ALTQ,			/* u32 = altq classif. qid	*/
 250	O_DIVERTED,		/* arg1=bitmap (1:loop, 2:out)	*/
 251	O_TCPDATALEN,		/* arg1 = tcp data len		*/
 252	O_IP6_SRC,		/* address without mask		*/
 253	O_IP6_SRC_ME,		/* my addresses			*/
 254	O_IP6_SRC_MASK,		/* address with the mask	*/
 255	O_IP6_DST,
 256	O_IP6_DST_ME,
 257	O_IP6_DST_MASK,
 258	O_FLOW6ID,		/* for flow id tag in the ipv6 pkt */
 259	O_ICMP6TYPE,		/* icmp6 packet type filtering	*/
 260	O_EXT_HDR,		/* filtering for ipv6 extension header */
 261	O_IP6,
 262
 263	/*
 264	 * actions for ng_ipfw
 265	 */
 266	O_NETGRAPH,		/* send to ng_ipfw		*/
 267	O_NGTEE,		/* copy to ng_ipfw		*/
 268
 269	O_IP4,
 270
 271	O_UNREACH6,		/* arg1=icmpv6 code arg (deny)  */
 272
 273	O_TAG,   		/* arg1=tag number */
 274	O_TAGGED,		/* arg1=tag number */
 275
 276	O_SETFIB,		/* arg1=FIB number */
 277	O_FIB,			/* arg1=FIB desired fib number */
 278
 279	O_SOCKARG,		/* socket argument */
 280
 281	O_CALLRETURN,		/* arg1=called rule number */
 282
 283	O_FORWARD_IP6,		/* fwd sockaddr_in6             */
 284
 285	O_DSCP,			/* 2 u32 = DSCP mask */
 286	O_SETDSCP,		/* arg1=DSCP value */
 287	O_IP_FLOW_LOOKUP,	/* arg1=table number, u32=value	*/
 288
 289	O_EXTERNAL_ACTION,	/* arg1=id of external action handler */
 290	O_EXTERNAL_INSTANCE,	/* arg1=id of eaction handler instance */
 291	O_EXTERNAL_DATA,	/* variable length data */
 292
 293	O_SKIP_ACTION,		/* none				*/
 294	O_TCPMSS,		/* arg1=MSS value */
 295
 296	O_MAC_SRC_LOOKUP,	/* arg1=table number, u32=value */
 297	O_MAC_DST_LOOKUP,	/* arg1=table number, u32=value */
 298
 299	O_SETMARK,		/* u32 = value */
 300	O_MARK,			/* 2 u32 = value, bitmask */
 301
 302	O_LAST_OPCODE		/* not an opcode!		*/
 303};
 304
 305/*
 306 * Defines key types used by lookup instruction
 307 */
 308enum ipfw_table_lookup_type {
 309	LOOKUP_DST_IP,
 310	LOOKUP_SRC_IP,
 311	LOOKUP_DST_PORT,
 312	LOOKUP_SRC_PORT,
 313	LOOKUP_UID,
 314	LOOKUP_JAIL,
 315	LOOKUP_DSCP,
 316	LOOKUP_DST_MAC,
 317	LOOKUP_SRC_MAC,
 318	LOOKUP_MARK,
 319};
 320
 321/*
 322 * The extension header are filtered only for presence using a bit
 323 * vector with a flag for each header.
 324 */
 325#define EXT_FRAGMENT	0x1
 326#define EXT_HOPOPTS	0x2
 327#define EXT_ROUTING	0x4
 328#define EXT_AH		0x8
 329#define EXT_ESP		0x10
 330#define EXT_DSTOPTS	0x20
 331#define EXT_RTHDR0		0x40
 332#define EXT_RTHDR2		0x80
 333
 334/*
 335 * Template for instructions.
 336 *
 337 * ipfw_insn is used for all instructions which require no operands,
 338 * a single 16-bit value (arg1), or a couple of 8-bit values.
 339 *
 340 * For other instructions which require different/larger arguments
 341 * we have derived structures, ipfw_insn_*.
 342 *
 343 * The size of the instruction (in 32-bit words) is in the low
 344 * 6 bits of "len". The 2 remaining bits are used to implement
 345 * NOT and OR on individual instructions. Given a type, you can
 346 * compute the length to be put in "len" using F_INSN_SIZE(t)
 347 *
 348 * F_NOT	negates the match result of the instruction.
 349 *
 350 * F_OR		is used to build or blocks. By default, instructions
 351 *		are evaluated as part of a logical AND. An "or" block
 352 *		{ X or Y or Z } contains F_OR set in all but the last
 353 *		instruction of the block. A match will cause the code
 354 *		to skip past the last instruction of the block.
 355 *
 356 * NOTA BENE: in a couple of places we assume that
 357 *	sizeof(ipfw_insn) == sizeof(u_int32_t)
 358 * this needs to be fixed.
 359 *
 360 */
 361typedef struct	_ipfw_insn {	/* template for instructions */
 362	_Alignas(_Alignof(u_int32_t)) u_int8_t 	opcode;
 363	u_int8_t	len;	/* number of 32-bit words */
 364#define	F_NOT		0x80
 365#define	F_OR		0x40
 366#define	F_LEN_MASK	0x3f
 367#define	F_LEN(cmd)	((cmd)->len & F_LEN_MASK)
 368
 369	u_int16_t	arg1;
 370} ipfw_insn;
 371
 372/*
 373 * The F_INSN_SIZE(type) computes the size, in 4-byte words, of
 374 * a given type.
 375 */
 376#define	F_INSN_SIZE(t)	((sizeof (t))/sizeof(u_int32_t))
 377
 378/*
 379 * This is used to store an array of 16-bit entries (ports etc.)
 380 */
 381typedef struct	_ipfw_insn_u16 {
 382	ipfw_insn o;
 383	u_int16_t ports[2];	/* there may be more */
 384} ipfw_insn_u16;
 385
 386/*
 387 * This is used to store an array of 32-bit entries
 388 * (uid, single IPv4 addresses etc.)
 389 */
 390typedef struct	_ipfw_insn_u32 {
 391	ipfw_insn o;
 392	u_int32_t d[1];	/* one or more */
 393} ipfw_insn_u32;
 394
 395/*
 396 * This is used to store IP addr-mask pairs.
 397 */
 398typedef struct	_ipfw_insn_ip {
 399	ipfw_insn o;
 400	struct in_addr	addr;
 401	struct in_addr	mask;
 402} ipfw_insn_ip;
 403
 404/*
 405 * This is used to forward to a given address (ip).
 406 */
 407typedef struct  _ipfw_insn_sa {
 408	ipfw_insn o;
 409	struct sockaddr_in sa;
 410} ipfw_insn_sa;
 411
 412/*
 413 * This is used to forward to a given address (ipv6).
 414 */
 415typedef struct _ipfw_insn_sa6 {
 416	ipfw_insn o;
 417	struct sockaddr_in6 sa;
 418} ipfw_insn_sa6;
 419
 420/*
 421 * This is used for MAC addr-mask pairs.
 422 */
 423typedef struct	_ipfw_insn_mac {
 424	ipfw_insn o;
 425	u_char addr[12];	/* dst[6] + src[6] */
 426	u_char mask[12];	/* dst[6] + src[6] */
 427} ipfw_insn_mac;
 428
 429/*
 430 * This is used for interface match rules (recv xx, xmit xx).
 431 */
 432typedef struct	_ipfw_insn_if {
 433	ipfw_insn o;
 434	union {
 435		struct in_addr ip;
 436		int glob;
 437		uint16_t kidx;
 438	} p;
 439	char name[IFNAMSIZ];
 440} ipfw_insn_if;
 441
 442/*
 443 * This is used for storing an altq queue id number.
 444 */
 445typedef struct _ipfw_insn_altq {
 446	ipfw_insn	o;
 447	u_int32_t	qid;
 448} ipfw_insn_altq;
 449
 450/*
 451 * This is used for limit rules.
 452 */
 453typedef struct	_ipfw_insn_limit {
 454	ipfw_insn o;
 455	u_int8_t _pad;
 456	u_int8_t limit_mask;	/* combination of DYN_* below	*/
 457#define	DYN_SRC_ADDR	0x1
 458#define	DYN_SRC_PORT	0x2
 459#define	DYN_DST_ADDR	0x4
 460#define	DYN_DST_PORT	0x8
 461
 462	u_int16_t conn_limit;
 463} ipfw_insn_limit;
 464
 465/*
 466 * This is used for log instructions.
 467 */
 468typedef struct  _ipfw_insn_log {
 469        ipfw_insn o;
 470	u_int32_t max_log;	/* how many do we log -- 0 = all */
 471	u_int32_t log_left;	/* how many left to log 	*/
 472} ipfw_insn_log;
 473
 474/* Legacy NAT structures, compat only */
 475#ifndef	_KERNEL
 476/*
 477 * Data structures required by both ipfw(8) and ipfw(4) but not part of the
 478 * management API are protected by IPFW_INTERNAL.
 479 */
 480#ifdef IPFW_INTERNAL
 481/* Server pool support (LSNAT). */
 482struct cfg_spool {
 483	LIST_ENTRY(cfg_spool)   _next;          /* chain of spool instances */
 484	struct in_addr          addr;
 485	u_short                 port;
 486};
 487#endif
 488
 489/* Redirect modes id. */
 490#define REDIR_ADDR      0x01
 491#define REDIR_PORT      0x02
 492#define REDIR_PROTO     0x04
 493
 494#ifdef IPFW_INTERNAL
 495/* Nat redirect configuration. */
 496struct cfg_redir {
 497	LIST_ENTRY(cfg_redir)   _next;          /* chain of redir instances */
 498	u_int16_t               mode;           /* type of redirect mode */
 499	struct in_addr	        laddr;          /* local ip address */
 500	struct in_addr	        paddr;          /* public ip address */
 501	struct in_addr	        raddr;          /* remote ip address */
 502	u_short                 lport;          /* local port */
 503	u_short                 pport;          /* public port */
 504	u_short                 rport;          /* remote port  */
 505	u_short                 pport_cnt;      /* number of public ports */
 506	u_short                 rport_cnt;      /* number of remote ports */
 507	int                     proto;          /* protocol: tcp/udp */
 508	struct alias_link       **alink;
 509	/* num of entry in spool chain */
 510	u_int16_t               spool_cnt;
 511	/* chain of spool instances */
 512	LIST_HEAD(spool_chain, cfg_spool) spool_chain;
 513};
 514#endif
 515
 516#ifdef IPFW_INTERNAL
 517/* Nat configuration data struct. */
 518struct cfg_nat {
 519	/* chain of nat instances */
 520	LIST_ENTRY(cfg_nat)     _next;
 521	int                     id;                     /* nat id */
 522	struct in_addr          ip;                     /* nat ip address */
 523	char                    if_name[IF_NAMESIZE];   /* interface name */
 524	int                     mode;                   /* aliasing mode */
 525	struct libalias	        *lib;                   /* libalias instance */
 526	/* number of entry in spool chain */
 527	int                     redir_cnt;
 528	/* chain of redir instances */
 529	LIST_HEAD(redir_chain, cfg_redir) redir_chain;
 530};
 531#endif
 532
 533#define SOF_NAT         sizeof(struct cfg_nat)
 534#define SOF_REDIR       sizeof(struct cfg_redir)
 535#define SOF_SPOOL       sizeof(struct cfg_spool)
 536
 537#endif	/* ifndef _KERNEL */
 538
 539struct nat44_cfg_spool {
 540	struct in_addr	addr;
 541	uint16_t	port;
 542	uint16_t	spare;
 543};
 544#define NAT44_REDIR_ADDR	0x01
 545#define NAT44_REDIR_PORT	0x02
 546#define NAT44_REDIR_PROTO	0x04
 547
 548/* Nat redirect configuration. */
 549struct nat44_cfg_redir {
 550	struct in_addr	laddr;		/* local ip address */
 551	struct in_addr	paddr;		/* public ip address */
 552	struct in_addr	raddr;		/* remote ip address */
 553	uint16_t	lport;		/* local port */
 554	uint16_t	pport;		/* public port */
 555	uint16_t	rport;		/* remote port  */
 556	uint16_t	pport_cnt;	/* number of public ports */
 557	uint16_t	rport_cnt;	/* number of remote ports */
 558	uint16_t	mode;		/* type of redirect mode */
 559	uint16_t	spool_cnt;	/* num of entry in spool chain */
 560	uint16_t	spare;
 561	uint32_t	proto;		/* protocol: tcp/udp */
 562};
 563
 564/* Nat configuration data struct. */
 565struct nat44_cfg_nat {
 566	char		name[64];	/* nat name */
 567	char		if_name[64];	/* interface name */
 568	uint32_t	size;		/* structure size incl. redirs */
 569	struct in_addr	ip;		/* nat IPv4 address */
 570	uint32_t	mode;		/* aliasing mode */
 571	uint32_t	redir_cnt;	/* number of entry in spool chain */
 572	u_short		alias_port_lo;	/* low range for port aliasing */
 573	u_short		alias_port_hi;	/* high range for port aliasing */
 574};
 575
 576/* Nat command. */
 577typedef struct	_ipfw_insn_nat {
 578 	ipfw_insn	o;
 579 	struct cfg_nat *nat;
 580} ipfw_insn_nat;
 581
 582/* Apply ipv6 mask on ipv6 addr */
 583#define APPLY_MASK(addr,mask)	do {					\
 584    (addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
 585    (addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
 586    (addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
 587    (addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3]; \
 588} while (0)
 589
 590/* Structure for ipv6 */
 591typedef struct _ipfw_insn_ip6 {
 592       ipfw_insn o;
 593       struct in6_addr addr6;
 594       struct in6_addr mask6;
 595} ipfw_insn_ip6;
 596
 597/* Used to support icmp6 types */
 598typedef struct _ipfw_insn_icmp6 {
 599       ipfw_insn o;
 600       uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
 601                       *     define ICMP6_MAXTYPE
 602                       *     as follows: n = ICMP6_MAXTYPE/32 + 1
 603                        *     Actually is 203
 604                       */
 605} ipfw_insn_icmp6;
 606
 607/*
 608 * Here we have the structure representing an ipfw rule.
 609 *
 610 * Layout:
 611 * struct ip_fw_rule
 612 * [ counter block, size = rule->cntr_len ]
 613 * [ one or more instructions, size = rule->cmd_len * 4 ]
 614 *
 615 * It starts with a general area (with link fields).
 616 * Counter block may be next (if rule->cntr_len > 0),
 617 * followed by an array of one or more instructions, which the code
 618 * accesses as an array of 32-bit values. rule->cmd_len represents
 619 * the total instructions legth in u32 worrd, while act_ofs represents
 620 * rule action offset in u32 words.
 621 *
 622 * When assembling instruction, remember the following:
 623 *
 624 *  + if a rule has a "keep-state" (or "limit") option, then the
 625 *	first instruction (at r->cmd) MUST BE an O_PROBE_STATE
 626 *  + if a rule has a "log" option, then the first action
 627 *	(at ACTION_PTR(r)) MUST be O_LOG
 628 *  + if a rule has an "altq" option, it comes after "log"
 629 *  + if a rule has an O_TAG option, it comes after "log" and "altq"
 630 *
 631 *
 632 * All structures (excluding instructions) are u64-aligned.
 633 * Please keep this.
 634 */
 635
 636struct ip_fw_rule {
 637	uint16_t	act_ofs;	/* offset of action in 32-bit units */
 638	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
 639	uint16_t	spare;
 640	uint8_t		set;		/* rule set (0..31)		*/
 641	uint8_t		flags;		/* rule flags			*/
 642	uint32_t	rulenum;	/* rule number			*/
 643	uint32_t	id;		/* rule id			*/
 644
 645	ipfw_insn	cmd[1];		/* storage for commands		*/
 646};
 647#define	IPFW_RULE_NOOPT		0x01	/* Has no options in body	*/
 648#define	IPFW_RULE_JUSTOPTS	0x02	/* new format of rule body	*/
 649
 650/* Unaligned version */
 651
 652/* Base ipfw rule counter block. */
 653struct ip_fw_bcounter {
 654	uint16_t	size;		/* Size of counter block, bytes	*/
 655	uint8_t		flags;		/* flags for given block	*/
 656	uint8_t		spare;
 657	uint32_t	timestamp;	/* tv_sec of last match		*/
 658	uint64_t	pcnt;		/* Packet counter		*/
 659	uint64_t	bcnt;		/* Byte counter			*/
 660};
 661
 662#ifndef	_KERNEL
 663/*
 664 * Legacy rule format
 665 */
 666struct ip_fw {
 667	struct ip_fw	*x_next;	/* linked list of rules		*/
 668	struct ip_fw	*next_rule;	/* ptr to next [skipto] rule	*/
 669	/* 'next_rule' is used to pass up 'set_disable' status		*/
 670
 671	uint16_t	act_ofs;	/* offset of action in 32-bit units */
 672	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
 673	uint16_t	rulenum;	/* rule number			*/
 674	uint8_t		set;		/* rule set (0..31)		*/
 675	uint8_t		_pad;		/* padding			*/
 676	uint32_t	id;		/* rule id */
 677
 678	/* These fields are present in all rules.			*/
 679	uint64_t	pcnt;		/* Packet counter		*/
 680	uint64_t	bcnt;		/* Byte counter			*/
 681	uint32_t	timestamp;	/* tv_sec of last match		*/
 682
 683	ipfw_insn	cmd[1];		/* storage for commands		*/
 684};
 685#endif
 686
 687#define ACTION_PTR(rule)				\
 688	(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
 689
 690#define RULESIZE(rule)  (sizeof(*(rule)) + (rule)->cmd_len * 4 - 4)
 691
 692#if 1 // should be moved to in.h
 693/*
 694 * This structure is used as a flow mask and a flow id for various
 695 * parts of the code.
 696 * addr_type is used in userland and kernel to mark the address type.
 697 * fib is used in the kernel to record the fib in use.
 698 * _flags is used in the kernel to store tcp flags for dynamic rules.
 699 */
 700struct ipfw_flow_id {
 701	uint32_t	dst_ip;
 702	uint32_t	src_ip;
 703	uint16_t	dst_port;
 704	uint16_t	src_port;
 705	uint8_t		fib;	/* XXX: must be uint16_t */
 706	uint8_t		proto;
 707	uint8_t		_flags;	/* protocol-specific flags */
 708	uint8_t		addr_type; /* 4=ip4, 6=ip6, 1=ether ? */
 709	struct in6_addr dst_ip6;
 710	struct in6_addr src_ip6;
 711	uint32_t	flow_id6;
 712	uint32_t	extra; /* queue/pipe or frag_id */
 713};
 714#endif
 715
 716#define	IS_IP4_FLOW_ID(id)	((id)->addr_type == 4)
 717#define IS_IP6_FLOW_ID(id)	((id)->addr_type == 6)
 718
 719/*
 720 * Dynamic ipfw rule.
 721 */
 722typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
 723
 724struct _ipfw_dyn_rule {
 725	ipfw_dyn_rule	*next;		/* linked list of rules.	*/
 726	struct ip_fw *rule;		/* pointer to rule		*/
 727	/* 'rule' is used to pass up the rule number (from the parent)	*/
 728
 729	ipfw_dyn_rule *parent;		/* pointer to parent rule	*/
 730	u_int64_t	pcnt;		/* packet match counter		*/
 731	u_int64_t	bcnt;		/* byte match counter		*/
 732	struct ipfw_flow_id id;		/* (masked) flow id		*/
 733	u_int32_t	expire;		/* expire time			*/
 734	u_int32_t	bucket;		/* which bucket in hash table	*/
 735	u_int32_t	state;		/* state of this rule (typically a
 736					 * combination of TCP flags)
 737					 */
 738#define	IPFW_DYN_ORPHANED	0x40000	/* state's parent rule was deleted */
 739	u_int32_t	ack_fwd;	/* most recent ACKs in forward	*/
 740	u_int32_t	ack_rev;	/* and reverse directions (used	*/
 741					/* to generate keepalives)	*/
 742	u_int16_t	dyn_type;	/* rule type			*/
 743	u_int16_t	count;		/* refcount			*/
 744	u_int16_t	kidx;		/* index of named object */
 745} __packed __aligned(8);
 746
 747/*
 748 * Definitions for IP option names.
 749 */
 750#define	IP_FW_IPOPT_LSRR	0x01
 751#define	IP_FW_IPOPT_SSRR	0x02
 752#define	IP_FW_IPOPT_RR		0x04
 753#define	IP_FW_IPOPT_TS		0x08
 754
 755/*
 756 * Definitions for TCP option names.
 757 */
 758#define	IP_FW_TCPOPT_MSS	0x01
 759#define	IP_FW_TCPOPT_WINDOW	0x02
 760#define	IP_FW_TCPOPT_SACK	0x04
 761#define	IP_FW_TCPOPT_TS		0x08
 762#define	IP_FW_TCPOPT_CC		0x10
 763
 764#define	ICMP_REJECT_RST		0x100	/* fake ICMP code (send a TCP RST) */
 765#define	ICMP6_UNREACH_RST	0x100	/* fake ICMPv6 code (send a TCP RST) */
 766#define	ICMP_REJECT_ABORT	0x101	/* fake ICMP code (send an SCTP ABORT) */
 767#define	ICMP6_UNREACH_ABORT	0x101	/* fake ICMPv6 code (send an SCTP ABORT) */
 768
 769/*
 770 * These are used for lookup tables.
 771 */
 772
 773#define	IPFW_TABLE_ADDR		1	/* Table for holding IPv4/IPv6 prefixes */
 774#define	IPFW_TABLE_INTERFACE	2	/* Table for holding interface names */
 775#define	IPFW_TABLE_NUMBER	3	/* Table for holding ports/uid/gid/etc */
 776#define	IPFW_TABLE_FLOW		4	/* Table for holding flow data */
 777#define	IPFW_TABLE_MAC		5	/* Table for holding mac address prefixes */
 778#define	IPFW_TABLE_MAXTYPE	5	/* Maximum valid number */
 779
 780#define	IPFW_TABLE_CIDR	IPFW_TABLE_ADDR	/* compat */
 781
 782/* Value types */
 783#define	IPFW_VTYPE_LEGACY	0xFFFFFFFF	/* All data is filled in */
 784#define	IPFW_VTYPE_SKIPTO	0x00000001	/* skipto/call/callreturn */
 785#define	IPFW_VTYPE_PIPE		0x00000002	/* pipe/queue */
 786#define	IPFW_VTYPE_FIB		0x00000004	/* setfib */
 787#define	IPFW_VTYPE_NAT		0x00000008	/* nat */
 788#define	IPFW_VTYPE_DSCP		0x00000010	/* dscp */
 789#define	IPFW_VTYPE_TAG		0x00000020	/* tag/untag */
 790#define	IPFW_VTYPE_DIVERT	0x00000040	/* divert/tee */
 791#define	IPFW_VTYPE_NETGRAPH	0x00000080	/* netgraph/ngtee */
 792#define	IPFW_VTYPE_LIMIT	0x00000100	/* limit */
 793#define	IPFW_VTYPE_NH4		0x00000200	/* IPv4 nexthop */
 794#define	IPFW_VTYPE_NH6		0x00000400	/* IPv6 nexthop */
 795#define	IPFW_VTYPE_MARK		0x00000800	/* [fw]mark */
 796
 797/* MAC/InfiniBand/etc address length */
 798#define	IPFW_MAX_L2_ADDR_LEN	20
 799
 800typedef struct	_ipfw_table_entry {
 801	in_addr_t	addr;		/* network address		*/
 802	u_int32_t	value;		/* value			*/
 803	u_int16_t	tbl;		/* table number			*/
 804	u_int8_t	masklen;	/* mask length			*/
 805} ipfw_table_entry;
 806
 807typedef struct	_ipfw_table_xentry {
 808	uint16_t	len;		/* Total entry length		*/
 809	uint8_t		type;		/* entry type			*/
 810	uint8_t		masklen;	/* mask length			*/
 811	uint16_t	tbl;		/* table number			*/
 812	uint16_t	flags;		/* record flags			*/
 813	uint32_t	value;		/* value			*/
 814	union {
 815		/* Longest field needs to be aligned by 4-byte boundary	*/
 816		struct in6_addr	addr6;	/* IPv6 address 		*/
 817		char	iface[IF_NAMESIZE];	/* interface name	*/
 818	} k;
 819} ipfw_table_xentry;
 820#define	IPFW_TCF_INET	0x01		/* CIDR flags: IPv4 record	*/
 821
 822typedef struct	_ipfw_table {
 823	u_int32_t	size;		/* size of entries in bytes	*/
 824	u_int32_t	cnt;		/* # of entries			*/
 825	u_int16_t	tbl;		/* table number			*/
 826	ipfw_table_entry ent[0];	/* entries			*/
 827} ipfw_table;
 828
 829typedef struct	_ipfw_xtable {
 830	ip_fw3_opheader	opheader;	/* IP_FW3 opcode */
 831	uint32_t	size;		/* size of entries in bytes	*/
 832	uint32_t	cnt;		/* # of entries			*/
 833	uint16_t	tbl;		/* table number			*/
 834	uint8_t		type;		/* table type			*/
 835	ipfw_table_xentry xent[0];	/* entries			*/
 836} ipfw_xtable;
 837
 838typedef struct  _ipfw_obj_tlv {
 839	uint16_t        type;		/* TLV type */
 840	uint16_t	flags;		/* TLV-specific flags		*/
 841	uint32_t        length;		/* Total length, aligned to u64	*/
 842} ipfw_obj_tlv;
 843#define	IPFW_TLV_TBL_NAME	1
 844#define	IPFW_TLV_TBLNAME_LIST	2
 845#define	IPFW_TLV_RULE_LIST	3
 846#define	IPFW_TLV_DYNSTATE_LIST	4
 847#define	IPFW_TLV_TBL_ENT	5
 848#define	IPFW_TLV_DYN_ENT	6
 849#define	IPFW_TLV_RULE_ENT	7
 850#define	IPFW_TLV_TBLENT_LIST	8
 851#define	IPFW_TLV_RANGE		9
 852#define	IPFW_TLV_EACTION	10
 853#define	IPFW_TLV_COUNTERS	11
 854#define	IPFW_TLV_OBJDATA	12
 855#define	IPFW_TLV_STATE_NAME	14
 856
 857#define	IPFW_TLV_EACTION_BASE	1000
 858#define	IPFW_TLV_EACTION_NAME(arg)	(IPFW_TLV_EACTION_BASE + (arg))
 859
 860typedef struct _ipfw_obj_data {
 861	ipfw_obj_tlv	head;
 862	void		*data[0];
 863} ipfw_obj_data;
 864
 865/* Object name TLV */
 866typedef struct _ipfw_obj_ntlv {
 867	ipfw_obj_tlv	head;		/* TLV header			*/
 868	uint16_t	idx;		/* Name index			*/
 869	uint8_t		set;		/* set, if applicable		*/
 870	uint8_t		type;		/* object type, if applicable	*/
 871	uint32_t	spare;		/* unused			*/
 872	char		name[64];	/* Null-terminated name		*/
 873} ipfw_obj_ntlv;
 874
 875/* IPv4/IPv6 L4 flow description */
 876struct tflow_entry {
 877	uint8_t		af;
 878	uint8_t		proto;
 879	uint16_t	spare;
 880	uint16_t	sport;
 881	uint16_t	dport;
 882	union {
 883		struct {
 884			struct in_addr	sip;
 885			struct in_addr	dip;
 886		} a4;
 887		struct {
 888			struct in6_addr	sip6;
 889			struct in6_addr	dip6;
 890		} a6;
 891	} a;
 892};
 893
 894/* 64-byte structure representing multi-field table value */
 895typedef struct _ipfw_table_value {
 896	uint32_t	tag;		/* O_TAG/O_TAGGED */
 897	uint32_t	pipe;		/* O_PIPE/O_QUEUE */
 898	uint16_t	divert;		/* O_DIVERT/O_TEE */
 899	uint16_t	skipto;		/* skipto, CALLRET */
 900	uint32_t	netgraph;	/* O_NETGRAPH/O_NGTEE */
 901	uint32_t	fib;		/* O_SETFIB */
 902	uint32_t	nat;		/* O_NAT */
 903	uint32_t	nh4;
 904	uint8_t		dscp;
 905	uint8_t		spare0;
 906	uint16_t	kidx;		/* value kernel index */
 907	struct in6_addr	nh6;
 908	uint32_t	limit;		/* O_LIMIT */
 909	uint32_t	zoneid;		/* scope zone id for nh6 */
 910	uint32_t	mark;		/* O_SETMARK/O_MARK */
 911	uint32_t	refcnt;		/* XXX 64-bit in kernel */
 912} ipfw_table_value;
 913
 914/* Table entry TLV */
 915typedef struct	_ipfw_obj_tentry {
 916	ipfw_obj_tlv	head;		/* TLV header			*/
 917	uint8_t		subtype;	/* subtype (IPv4,IPv6)		*/
 918	uint8_t		masklen;	/* mask length			*/
 919	uint8_t		result;		/* request result		*/
 920	uint8_t		spare0;
 921	uint16_t	idx;		/* Table name index		*/
 922	uint16_t	spare1;
 923	union {
 924		/* Longest field needs to be aligned by 8-byte boundary	*/
 925		struct in_addr		addr;		/* IPv4 address		*/
 926		uint32_t		key;		/* uid/gid/port		*/
 927		struct in6_addr		addr6;		/* IPv6 address 	*/
 928		char	iface[IF_NAMESIZE];		/* interface name	*/
 929		u_char	mac[IPFW_MAX_L2_ADDR_LEN];	/* MAC address		*/
 930		struct tflow_entry	flow;
 931	} k;
 932	union {
 933		ipfw_table_value	value;	/* value data */
 934		uint32_t		kidx;	/* value kernel index */
 935	} v;
 936} ipfw_obj_tentry;
 937#define	IPFW_TF_UPDATE	0x01		/* Update record if exists	*/
 938/* Container TLV */
 939#define	IPFW_CTF_ATOMIC	0x01		/* Perform atomic operation	*/
 940/* Operation results */
 941#define	IPFW_TR_IGNORED		0	/* Entry was ignored (rollback)	*/
 942#define	IPFW_TR_ADDED		1	/* Entry was successfully added	*/
 943#define	IPFW_TR_UPDATED		2	/* Entry was successfully updated*/
 944#define	IPFW_TR_DELETED		3	/* Entry was successfully deleted*/
 945#define	IPFW_TR_LIMIT		4	/* Entry was ignored (limit)	*/
 946#define	IPFW_TR_NOTFOUND	5	/* Entry was not found		*/
 947#define	IPFW_TR_EXISTS		6	/* Entry already exists		*/
 948#define	IPFW_TR_ERROR		7	/* Request has failed (unknown)	*/
 949
 950typedef struct _ipfw_obj_dyntlv {
 951	ipfw_obj_tlv	head;
 952	ipfw_dyn_rule	state;
 953} ipfw_obj_dyntlv;
 954#define	IPFW_DF_LAST	0x01		/* Last state in chain		*/
 955
 956/* Containter TLVs */
 957typedef struct _ipfw_obj_ctlv {
 958	ipfw_obj_tlv	head;		/* TLV header			*/
 959	uint32_t	count;		/* Number of sub-TLVs		*/
 960	uint16_t	objsize;	/* Single object size		*/
 961	uint8_t		version;	/* TLV version			*/
 962	uint8_t		flags;		/* TLV-specific flags		*/
 963} ipfw_obj_ctlv;
 964
 965/* Range TLV */
 966typedef struct _ipfw_range_tlv {
 967	ipfw_obj_tlv	head;		/* TLV header			*/
 968	uint32_t	flags;		/* Range flags			*/
 969	uint16_t	start_rule;	/* Range start			*/
 970	uint16_t	end_rule;	/* Range end			*/
 971	uint32_t	set;		/* Range set to match		 */
 972	uint32_t	new_set;	/* New set to move/swap to	*/
 973} ipfw_range_tlv;
 974#define	IPFW_RCFLAG_RANGE	0x01	/* rule range is set		*/
 975#define	IPFW_RCFLAG_ALL		0x02	/* match ALL rules		*/
 976#define	IPFW_RCFLAG_SET		0x04	/* match rules in given set	*/
 977#define	IPFW_RCFLAG_DYNAMIC	0x08	/* match only dynamic states	*/
 978/* User-settable flags */
 979#define	IPFW_RCFLAG_USER	(IPFW_RCFLAG_RANGE | IPFW_RCFLAG_ALL | \
 980	IPFW_RCFLAG_SET | IPFW_RCFLAG_DYNAMIC)
 981/* Internally used flags */
 982#define	IPFW_RCFLAG_DEFAULT	0x0100	/* Do not skip default rule	*/
 983
 984typedef struct _ipfw_ta_tinfo {
 985	uint32_t	flags;		/* Format flags			*/
 986	uint32_t	spare;
 987	uint8_t		taclass4;	/* algorithm class		*/
 988	uint8_t		spare4;
 989	uint16_t	itemsize4;	/* item size in runtime		*/
 990	uint32_t	size4;		/* runtime structure size	*/
 991	uint32_t	count4;		/* number of items in runtime	*/
 992	uint8_t		taclass6;	/* algorithm class		*/
 993	uint8_t		spare6;
 994	uint16_t	itemsize6;	/* item size in runtime		*/
 995	uint32_t	size6;		/* runtime structure size	*/
 996	uint32_t	count6;		/* number of items in runtime	*/
 997} ipfw_ta_tinfo;
 998#define	IPFW_TACLASS_HASH	1	/* algo is based on hash	*/
 999#define	IPFW_TACLASS_ARRAY	2	/* algo is based on array	*/
1000#define	IPFW_TACLASS_RADIX	3	/* algo is based on radix tree	*/
1001
1002#define	IPFW_TATFLAGS_DATA	0x0001		/* Has data filled in	*/
1003#define	IPFW_TATFLAGS_AFDATA	0x0002		/* Separate data per AF	*/
1004#define	IPFW_TATFLAGS_AFITEM	0x0004		/* diff. items per AF	*/
1005
1006typedef struct _ipfw_xtable_info {
1007	uint8_t		type;		/* table type (addr,iface,..)	*/
1008	uint8_t		tflags;		/* type flags			*/
1009	uint16_t	mflags;		/* modification flags		*/
1010	uint16_t	flags;		/* generic table flags		*/
1011	uint16_t	spare[3];
1012	uint32_t	vmask;		/* bitmask with value types 	*/
1013	uint32_t	set;		/* set table is in		*/
1014	uint32_t	kidx;		/* kernel index			*/
1015	uint32_t	refcnt;		/* number of references		*/
1016	uint32_t	count;		/* Number of records		*/
1017	uint32_t	size;		/* Total size of records(export)*/
1018	uint32_t	limit;		/* Max number of records	*/
1019	char		tablename[64];	/* table name */
1020	char		algoname[64];	/* algorithm name		*/
1021	ipfw_ta_tinfo	ta_info;	/* additional algo stats	*/
1022} ipfw_xtable_info;
1023/* Generic table flags */
1024#define	IPFW_TGFLAGS_LOCKED	0x01	/* Tables is locked from changes*/
1025/* Table type-specific flags */
1026#define	IPFW_TFFLAG_SRCIP	0x01
1027#define	IPFW_TFFLAG_DSTIP	0x02
1028#define	IPFW_TFFLAG_SRCPORT	0x04
1029#define	IPFW_TFFLAG_DSTPORT	0x08
1030#define	IPFW_TFFLAG_PROTO	0x10
1031/* Table modification flags */
1032#define	IPFW_TMFLAGS_LIMIT	0x0002	/* Change limit value		*/
1033#define	IPFW_TMFLAGS_LOCK	0x0004	/* Change table lock state	*/
1034
1035typedef struct _ipfw_iface_info {
1036	char		ifname[64];	/* interface name		*/
1037	uint32_t	ifindex;	/* interface index		*/
1038	uint32_t	flags;		/* flags			*/
1039	uint32_t	refcnt;		/* number of references		*/
1040	uint32_t	gencnt;		/* number of changes		*/
1041	uint64_t	spare;
1042} ipfw_iface_info;
1043#define	IPFW_IFFLAG_RESOLVED	0x01	/* Interface exists		*/
1044
1045typedef struct _ipfw_ta_info {
1046	char		algoname[64];	/* algorithm name		*/
1047	uint32_t	type;		/* lookup type			*/
1048	uint32_t	flags;
1049	uint32_t	refcnt;
1050	uint32_t	spare0;
1051	uint64_t	spare1;
1052} ipfw_ta_info;
1053
1054typedef struct _ipfw_obj_header {
1055	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1056	uint32_t	spare;
1057	uint16_t	idx;		/* object name index		*/
1058	uint8_t		objtype;	/* object type			*/
1059	uint8_t		objsubtype;	/* object subtype		*/
1060	ipfw_obj_ntlv	ntlv;		/* object name tlv		*/
1061} ipfw_obj_header;
1062
1063typedef struct _ipfw_obj_lheader {
1064	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1065	uint32_t	set_mask;	/* disabled set mask		*/
1066	uint32_t	count;		/* Total objects count		*/
1067	uint32_t	size;		/* Total size (incl. header)	*/
1068	uint32_t	objsize;	/* Size of one object		*/
1069} ipfw_obj_lheader;
1070
1071#define	IPFW_CFG_GET_STATIC	0x01
1072#define	IPFW_CFG_GET_STATES	0x02
1073#define	IPFW_CFG_GET_COUNTERS	0x04
1074typedef struct _ipfw_cfg_lheader {
1075	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1076	uint32_t	set_mask;	/* enabled set mask		*/
1077	uint32_t	spare;
1078	uint32_t	flags;		/* Request flags		*/
1079	uint32_t	size;		/* neded buffer size		*/
1080	uint32_t	start_rule;
1081	uint32_t	end_rule;
1082} ipfw_cfg_lheader;
1083
1084typedef struct _ipfw_range_header {
1085	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1086	ipfw_range_tlv	range;
1087} ipfw_range_header;
1088
1089typedef struct _ipfw_sopt_info {
1090	uint16_t	opcode;
1091	uint8_t		version;
1092	uint8_t		dir;
1093	uint8_t		spare;
1094	uint64_t	refcnt;
1095} ipfw_sopt_info;
1096
1097#endif /* _IPFW2_H */