master
1/*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28#ifndef _USB_CONTROLLER_H_
29#define _USB_CONTROLLER_H_
30
31/* defines */
32
33#define USB_BUS_DMA_TAG_MAX 8
34
35/* structure prototypes */
36
37struct usb_bus;
38struct usb_page;
39struct usb_endpoint;
40struct usb_page_cache;
41struct usb_setup_params;
42struct usb_hw_ep_profile;
43struct usb_fs_isoc_schedule;
44struct usb_endpoint_descriptor;
45
46/* typedefs */
47
48typedef void (usb_bus_mem_sub_cb_t)(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align);
49typedef void (usb_bus_mem_cb_t)(struct usb_bus *bus, usb_bus_mem_sub_cb_t *scb);
50
51/*
52 * The following structure is used to define all the USB BUS
53 * callbacks.
54 */
55struct usb_bus_methods {
56 /* USB Device and Host mode - Mandatory */
57
58 usb_handle_req_t *roothub_exec;
59
60 void (*endpoint_init) (struct usb_device *,
61 struct usb_endpoint_descriptor *, struct usb_endpoint *);
62 void (*xfer_setup) (struct usb_setup_params *);
63 void (*xfer_unsetup) (struct usb_xfer *);
64 void (*get_dma_delay) (struct usb_device *, uint32_t *);
65 void (*device_suspend) (struct usb_device *);
66 void (*device_resume) (struct usb_device *);
67 void (*set_hw_power) (struct usb_bus *);
68 void (*set_hw_power_sleep) (struct usb_bus *, uint32_t);
69 /*
70 * The following flag is set if one or more control transfers are
71 * active:
72 */
73#define USB_HW_POWER_CONTROL 0x01
74 /*
75 * The following flag is set if one or more bulk transfers are
76 * active:
77 */
78#define USB_HW_POWER_BULK 0x02
79 /*
80 * The following flag is set if one or more interrupt transfers are
81 * active:
82 */
83#define USB_HW_POWER_INTERRUPT 0x04
84 /*
85 * The following flag is set if one or more isochronous transfers
86 * are active:
87 */
88#define USB_HW_POWER_ISOC 0x08
89 /*
90 * The following flag is set if one or more non-root-HUB devices
91 * are present on the given USB bus:
92 */
93#define USB_HW_POWER_NON_ROOT_HUB 0x10
94 /*
95 * The following flag is set if we are suspending
96 */
97#define USB_HW_POWER_SUSPEND 0x20
98 /*
99 * The following flag is set if we are resuming
100 */
101#define USB_HW_POWER_RESUME 0x40
102 /*
103 * The following flag is set if we are shutting down
104 */
105#define USB_HW_POWER_SHUTDOWN 0x60
106
107 /* USB Device mode only - Mandatory */
108
109 void (*get_hw_ep_profile) (struct usb_device *udev, const struct usb_hw_ep_profile **ppf, uint8_t ep_addr);
110 void (*xfer_stall) (struct usb_xfer *xfer);
111 void (*set_stall) (struct usb_device *udev, struct usb_endpoint *ep, uint8_t *did_stall);
112
113 /* USB Device mode mandatory. USB Host mode optional. */
114
115 void (*clear_stall) (struct usb_device *udev, struct usb_endpoint *ep);
116
117 /* Optional transfer polling support */
118
119 void (*xfer_poll) (struct usb_bus *);
120
121 /* Optional fixed power mode support */
122
123 void (*get_power_mode) (struct usb_device *udev, int8_t *pmode);
124
125 /* Optional endpoint uninit */
126
127 void (*endpoint_uninit) (struct usb_device *, struct usb_endpoint *);
128
129 /* Optional device init */
130
131 usb_error_t (*device_init) (struct usb_device *);
132
133 /* Optional device uninit */
134
135 void (*device_uninit) (struct usb_device *);
136
137 /* Optional for device and host mode */
138
139 void (*start_dma_delay) (struct usb_xfer *);
140
141 void (*device_state_change) (struct usb_device *);
142
143 /* Optional for host mode */
144
145 usb_error_t (*set_address) (struct usb_device *, struct mtx *, uint16_t);
146
147 /* Optional for device and host mode */
148
149 usb_error_t (*set_endpoint_mode) (struct usb_device *, struct usb_endpoint *, uint8_t);
150};
151
152/*
153 * The following structure is used to define all the USB pipe
154 * callbacks.
155 */
156struct usb_pipe_methods {
157 /* Mandatory USB Device and Host mode callbacks: */
158
159 void (*open)(struct usb_xfer *);
160 void (*close)(struct usb_xfer *);
161
162 void (*enter)(struct usb_xfer *);
163 void (*start)(struct usb_xfer *);
164
165 /* Optional */
166
167 void *info;
168};
169
170/*
171 * The following structure keeps information about what a hardware USB
172 * endpoint supports.
173 */
174struct usb_hw_ep_profile {
175 uint16_t max_in_frame_size; /* IN-token direction */
176 uint16_t max_out_frame_size; /* OUT-token direction */
177 uint8_t is_simplex:1;
178 uint8_t support_multi_buffer:1;
179 uint8_t support_bulk:1;
180 uint8_t support_control:1;
181 uint8_t support_interrupt:1;
182 uint8_t support_isochronous:1;
183 uint8_t support_in:1; /* IN-token is supported */
184 uint8_t support_out:1; /* OUT-token is supported */
185};
186
187/* prototypes */
188
189void usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
190uint8_t usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, usb_bus_mem_cb_t *cb);
191void usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
192uint16_t usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr);
193void usb_bus_reset_async_locked(struct usb_bus *bus);
194#if USB_HAVE_TT_SUPPORT
195uint8_t usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time);
196#endif
197
198#endif /* _USB_CONTROLLER_H_ */