master
1/*-
2 * SPDX-License-Identifier: BSD-3-Clause
3 *
4 * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions are
9 * met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
13 * substantially similar to the "NO WARRANTY" disclaimer below
14 * ("Disclaimer") and any redistribution must be conditioned upon including
15 * a substantially similar Disclaimer requirement for further binary
16 * redistribution.
17 * 3. Neither the name of the LSI Logic Corporation nor the names of its
18 * contributors may be used to endorse or promote products derived from
19 * this software without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
31 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 * Name: mpi_sas.h
34 * Title: MPI Serial Attached SCSI structures and definitions
35 * Creation Date: August 19, 2004
36 *
37 * mpi_sas.h Version: 01.05.05
38 *
39 * Version History
40 * ---------------
41 *
42 * Date Version Description
43 * -------- -------- ------------------------------------------------------
44 * 08-19-04 01.05.01 Original release.
45 * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
46 * Added PrimFlags and Primitive field to SAS IO Unit
47 * Control request, and added a new operation code.
48 * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
49 * and Remove Device operations to SAS IO Unit Control.
50 * Added DevHandle field to SAS IO Unit Control request and
51 * reply.
52 * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
53 * Unit Control request.
54 * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
55 * including adding IOCParameter and IOCParameter value
56 * fields to SAS IO Unit Control Request.
57 * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
58 * --------------------------------------------------------------------------
59 */
60
61#ifndef MPI_SAS_H
62#define MPI_SAS_H
63
64/*
65 * Values for SASStatus.
66 */
67#define MPI_SASSTATUS_SUCCESS (0x00)
68#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
69#define MPI_SASSTATUS_INVALID_FRAME (0x02)
70#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
71#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
72#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
73#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
74#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
75#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
76#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
77#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
78#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
79#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
80#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
81#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
82#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
83#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
84#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
85#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
86#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
87#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
88
89/*
90 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
91 * data and SAS IO Unit Configuration pages.
92 */
93#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
94
95#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
96#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
97#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
98#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
99#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
100#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
101#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
102#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
103#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
104#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
105#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
106#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
107
108#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
109#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
110#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
111#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
112#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
113
114/*****************************************************************************
115*
116* S e r i a l A t t a c h e d S C S I M e s s a g e s
117*
118*****************************************************************************/
119
120/****************************************************************************/
121/* Serial Management Protocol Passthrough Request */
122/****************************************************************************/
123
124typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
125{
126 U8 PassthroughFlags; /* 00h */
127 U8 PhysicalPort; /* 01h */
128 U8 ChainOffset; /* 02h */
129 U8 Function; /* 03h */
130 U16 RequestDataLength; /* 04h */
131 U8 ConnectionRate; /* 06h */
132 U8 MsgFlags; /* 07h */
133 U32 MsgContext; /* 08h */
134 U32 Reserved1; /* 0Ch */
135 U64 SASAddress; /* 10h */
136 U32 Reserved2; /* 18h */
137 U32 Reserved3; /* 1Ch */
138 SGE_SIMPLE_UNION SGL; /* 20h */
139} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
140 SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
141
142/* values for PassthroughFlags field */
143#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
144
145/* values for ConnectionRate field */
146#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
147#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
148#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
149
150/* Serial Management Protocol Passthrough Reply */
151typedef struct _MSG_SMP_PASSTHROUGH_REPLY
152{
153 U8 PassthroughFlags; /* 00h */
154 U8 PhysicalPort; /* 01h */
155 U8 MsgLength; /* 02h */
156 U8 Function; /* 03h */
157 U16 ResponseDataLength; /* 04h */
158 U8 Reserved1; /* 06h */
159 U8 MsgFlags; /* 07h */
160 U32 MsgContext; /* 08h */
161 U8 Reserved2; /* 0Ch */
162 U8 SASStatus; /* 0Dh */
163 U16 IOCStatus; /* 0Eh */
164 U32 IOCLogInfo; /* 10h */
165 U32 Reserved3; /* 14h */
166 U8 ResponseData[4]; /* 18h */
167} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
168 SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
169
170#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
171
172/****************************************************************************/
173/* SATA Passthrough Request */
174/****************************************************************************/
175
176typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
177{
178 U8 TargetID; /* 00h */
179 U8 Bus; /* 01h */
180 U8 ChainOffset; /* 02h */
181 U8 Function; /* 03h */
182 U16 PassthroughFlags; /* 04h */
183 U8 ConnectionRate; /* 06h */
184 U8 MsgFlags; /* 07h */
185 U32 MsgContext; /* 08h */
186 U32 Reserved1; /* 0Ch */
187 U32 Reserved2; /* 10h */
188 U32 Reserved3; /* 14h */
189 U32 DataLength; /* 18h */
190 U8 CommandFIS[20]; /* 1Ch */
191 SGE_SIMPLE_UNION SGL; /* 30h */
192} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
193 SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
194
195/* values for PassthroughFlags field */
196#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
197#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
198#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
199#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
200#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
201#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
202#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
203#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
204#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
205
206/* values for ConnectionRate field */
207#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
208#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
209#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
210
211/* SATA Passthrough Reply */
212typedef struct _MSG_SATA_PASSTHROUGH_REPLY
213{
214 U8 TargetID; /* 00h */
215 U8 Bus; /* 01h */
216 U8 MsgLength; /* 02h */
217 U8 Function; /* 03h */
218 U16 PassthroughFlags; /* 04h */
219 U8 Reserved1; /* 06h */
220 U8 MsgFlags; /* 07h */
221 U32 MsgContext; /* 08h */
222 U8 Reserved2; /* 0Ch */
223 U8 SASStatus; /* 0Dh */
224 U16 IOCStatus; /* 0Eh */
225 U32 IOCLogInfo; /* 10h */
226 U8 StatusFIS[20]; /* 14h */
227 U32 StatusControlRegisters; /* 28h */
228 U32 TransferCount; /* 2Ch */
229} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
230 SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
231
232/****************************************************************************/
233/* SAS IO Unit Control Request */
234/****************************************************************************/
235
236typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
237{
238 U8 Operation; /* 00h */
239 U8 Reserved1; /* 01h */
240 U8 ChainOffset; /* 02h */
241 U8 Function; /* 03h */
242 U16 DevHandle; /* 04h */
243 U8 IOCParameter; /* 06h */
244 U8 MsgFlags; /* 07h */
245 U32 MsgContext; /* 08h */
246 U8 TargetID; /* 0Ch */
247 U8 Bus; /* 0Dh */
248 U8 PhyNum; /* 0Eh */
249 U8 PrimFlags; /* 0Fh */
250 U32 Primitive; /* 10h */
251 U64 SASAddress; /* 14h */
252 U32 IOCParameterValue; /* 1Ch */
253} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
254 SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
255
256/* values for the Operation field */
257#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
258#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
259#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
260#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
261#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
262#define MPI_SAS_OP_MAP_CURRENT (0x09)
263#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
264#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
265#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
266#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
267#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
268#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
269#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
270
271/* values for the PrimFlags field */
272#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
273#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
274#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
275
276/* SAS IO Unit Control Reply */
277typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
278{
279 U8 Operation; /* 00h */
280 U8 Reserved1; /* 01h */
281 U8 MsgLength; /* 02h */
282 U8 Function; /* 03h */
283 U16 DevHandle; /* 04h */
284 U8 IOCParameter; /* 06h */
285 U8 MsgFlags; /* 07h */
286 U32 MsgContext; /* 08h */
287 U16 Reserved4; /* 0Ch */
288 U16 IOCStatus; /* 0Eh */
289 U32 IOCLogInfo; /* 10h */
290} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
291 SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
292
293#endif