1/*-
  2 * SPDX-License-Identifier: BSD-3-Clause
  3 *
  4 * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
  5 * All rights reserved.
  6 * 
  7 * Redistribution and use in source and binary forms, with or without
  8 * modification, are permitted provided that the following conditions are
  9 * met:
 10 * 1. Redistributions of source code must retain the above copyright
 11 *    notice, this list of conditions and the following disclaimer.
 12 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 13 *    substantially similar to the "NO WARRANTY" disclaimer below
 14 *    ("Disclaimer") and any redistribution must be conditioned upon including
 15 *    a substantially similar Disclaimer requirement for further binary
 16 *    redistribution.
 17 * 3. Neither the name of the LSI Logic Corporation nor the names of its
 18 *    contributors may be used to endorse or promote products derived from
 19 *    this software without specific prior written permission.
 20 * 
 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 25 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
 31 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 32 *
 33 *           Name:  mpi_raid.h
 34 *          Title:  MPI RAID message and structures
 35 *  Creation Date:  February 27, 2001
 36 *
 37 *    mpi_raid.h Version:  01.05.05
 38 *
 39 *  Version History
 40 *  ---------------
 41 *
 42 *  Date      Version   Description
 43 *  --------  --------  ------------------------------------------------------
 44 *  02-27-01  01.01.01  Original release for this file.
 45 *  03-27-01  01.01.02  Added structure offset comments.
 46 *  08-08-01  01.02.01  Original release for v1.2 work.
 47 *  09-28-01  01.02.02  Major rework for MPI v1.2 Integrated RAID changes.
 48 *  10-04-01  01.02.03  Added ActionData defines for
 49 *                      MPI_RAID_ACTION_DELETE_VOLUME action.
 50 *  11-01-01  01.02.04  Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
 51 *  03-14-02  01.02.05  Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
 52 *  05-07-02  01.02.06  Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
 53 *                      MPI_RAID_ACTION_INACTIVATE_VOLUME, and
 54 *                      MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
 55 *  07-12-02  01.02.07  Added structures for Mailbox request and reply.
 56 *  11-15-02  01.02.08  Added missing MsgContext field to MSG_MAILBOX_REQUEST.
 57 *  04-01-03  01.02.09  New action data option flag for
 58 *                      MPI_RAID_ACTION_DELETE_VOLUME.
 59 *  05-11-04  01.03.01  Original release for MPI v1.3.
 60 *  08-19-04  01.05.01  Original release for MPI v1.5.
 61 *  01-15-05  01.05.02  Added defines for the two new RAID Actions for
 62 *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
 63 *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
 64 *                      associated defines.
 65 *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
 66 *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
 67 *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
 68 *  --------------------------------------------------------------------------
 69 */
 70
 71#ifndef MPI_RAID_H
 72#define MPI_RAID_H
 73
 74/******************************************************************************
 75*
 76*        R A I D    M e s s a g e s
 77*
 78*******************************************************************************/
 79
 80/****************************************************************************/
 81/* RAID Action Request                                                      */
 82/****************************************************************************/
 83
 84typedef struct _MSG_RAID_ACTION
 85{
 86    U8                      Action;             /* 00h */
 87    U8                      Reserved1;          /* 01h */
 88    U8                      ChainOffset;        /* 02h */
 89    U8                      Function;           /* 03h */
 90    U8                      VolumeID;           /* 04h */
 91    U8                      VolumeBus;          /* 05h */
 92    U8                      PhysDiskNum;        /* 06h */
 93    U8                      MsgFlags;           /* 07h */
 94    U32                     MsgContext;         /* 08h */
 95    U32                     Reserved2;          /* 0Ch */
 96    U32                     ActionDataWord;     /* 10h */
 97    SGE_SIMPLE_UNION        ActionDataSGE;      /* 14h */
 98} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST,
 99  MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t;
100
101/* RAID Action request Action values */
102
103#define MPI_RAID_ACTION_STATUS                      (0x00)
104#define MPI_RAID_ACTION_INDICATOR_STRUCT            (0x01)
105#define MPI_RAID_ACTION_CREATE_VOLUME               (0x02)
106#define MPI_RAID_ACTION_DELETE_VOLUME               (0x03)
107#define MPI_RAID_ACTION_DISABLE_VOLUME              (0x04)
108#define MPI_RAID_ACTION_ENABLE_VOLUME               (0x05)
109#define MPI_RAID_ACTION_QUIESCE_PHYS_IO             (0x06)
110#define MPI_RAID_ACTION_ENABLE_PHYS_IO              (0x07)
111#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS      (0x08)
112#define MPI_RAID_ACTION_PHYSDISK_OFFLINE            (0x0A)
113#define MPI_RAID_ACTION_PHYSDISK_ONLINE             (0x0B)
114#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS    (0x0C)
115#define MPI_RAID_ACTION_CREATE_PHYSDISK             (0x0D)
116#define MPI_RAID_ACTION_DELETE_PHYSDISK             (0x0E)
117#define MPI_RAID_ACTION_FAIL_PHYSDISK               (0x0F)
118#define MPI_RAID_ACTION_REPLACE_PHYSDISK            (0x10)
119#define MPI_RAID_ACTION_ACTIVATE_VOLUME             (0x11)
120#define MPI_RAID_ACTION_INACTIVATE_VOLUME           (0x12)
121#define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
122#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
123#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE       (0x15)
124#define MPI_RAID_ACTION_SET_VOLUME_NAME             (0x16)
125
126/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
127#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
128#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT        (0x00000002)
129
130/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */
131#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS       (0x00000000)
132#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS        (0x00000001)
133
134#define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
135#define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
136
137/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
138#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD  (0x00000001)
139
140/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
141#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
142
143/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_RESYNC_RATE action */
144#define MPI_RAID_ACTION_ADATA_RESYNC_RATE_MASK      (0x000000FF)
145
146/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */
147#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK  (0x000000FF)
148
149/* ActionDataWord defines for use with MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
150#define MPI_RAID_ACTION_ADATA_ENABLE_FW_UPDATE          (0x00000001)
151#define MPI_RAID_ACTION_ADATA_MASK_FW_UPDATE_TIMEOUT    (0x0000FF00)
152#define MPI_RAID_ACTION_ADATA_SHIFT_FW_UPDATE_TIMEOUT   (8)
153
154/* RAID Action reply message */
155
156typedef struct _MSG_RAID_ACTION_REPLY
157{
158    U8                      Action;             /* 00h */
159    U8                      Reserved;           /* 01h */
160    U8                      MsgLength;          /* 02h */
161    U8                      Function;           /* 03h */
162    U8                      VolumeID;           /* 04h */
163    U8                      VolumeBus;          /* 05h */
164    U8                      PhysDiskNum;        /* 06h */
165    U8                      MsgFlags;           /* 07h */
166    U32                     MsgContext;         /* 08h */
167    U16                     ActionStatus;       /* 0Ch */
168    U16                     IOCStatus;          /* 0Eh */
169    U32                     IOCLogInfo;         /* 10h */
170    U32                     VolumeStatus;       /* 14h */
171    U32                     ActionData;         /* 18h */
172} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY,
173  MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t;
174
175/* RAID Volume reply ActionStatus values */
176
177#define MPI_RAID_ACTION_ASTATUS_SUCCESS             (0x0000)
178#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION      (0x0001)
179#define MPI_RAID_ACTION_ASTATUS_FAILURE             (0x0002)
180#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS         (0x0003)
181
182/* RAID Volume reply RAID Volume Indicator structure */
183
184typedef struct _MPI_RAID_VOL_INDICATOR
185{
186    U64                     TotalBlocks;        /* 00h */
187    U64                     BlocksRemaining;    /* 08h */
188} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR,
189  MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t;
190
191/****************************************************************************/
192/* SCSI IO RAID Passthrough Request                                         */
193/****************************************************************************/
194
195typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST
196{
197    U8                      PhysDiskNum;        /* 00h */
198    U8                      Reserved1;          /* 01h */
199    U8                      ChainOffset;        /* 02h */
200    U8                      Function;           /* 03h */
201    U8                      CDBLength;          /* 04h */
202    U8                      SenseBufferLength;  /* 05h */
203    U8                      Reserved2;          /* 06h */
204    U8                      MsgFlags;           /* 07h */
205    U32                     MsgContext;         /* 08h */
206    U8                      LUN[8];             /* 0Ch */
207    U32                     Control;            /* 14h */
208    U8                      CDB[16];            /* 18h */
209    U32                     DataLength;         /* 28h */
210    U32                     SenseBufferLowAddr; /* 2Ch */
211    SGE_IO_UNION            SGL;                /* 30h */
212} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST,
213  SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t;
214
215/* SCSI IO RAID Passthrough reply structure */
216
217typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
218{
219    U8                      PhysDiskNum;        /* 00h */
220    U8                      Reserved1;          /* 01h */
221    U8                      MsgLength;          /* 02h */
222    U8                      Function;           /* 03h */
223    U8                      CDBLength;          /* 04h */
224    U8                      SenseBufferLength;  /* 05h */
225    U8                      Reserved2;          /* 06h */
226    U8                      MsgFlags;           /* 07h */
227    U32                     MsgContext;         /* 08h */
228    U8                      SCSIStatus;         /* 0Ch */
229    U8                      SCSIState;          /* 0Dh */
230    U16                     IOCStatus;          /* 0Eh */
231    U32                     IOCLogInfo;         /* 10h */
232    U32                     TransferCount;      /* 14h */
233    U32                     SenseCount;         /* 18h */
234    U32                     ResponseInfo;       /* 1Ch */
235} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY,
236  SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t;
237
238/****************************************************************************/
239/* Mailbox reqeust structure */
240/****************************************************************************/
241
242typedef struct _MSG_MAILBOX_REQUEST
243{
244    U16                     Reserved1;
245    U8                      ChainOffset;
246    U8                      Function;
247    U16                     Reserved2;
248    U8                      Reserved3;
249    U8                      MsgFlags;
250    U32                     MsgContext;
251    U8                      Command[10];
252    U16                     Reserved4;
253    SGE_IO_UNION            SGL;
254} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST,
255  MailboxRequest_t, MPI_POINTER pMailboxRequest_t;
256
257/* Mailbox reply structure */
258typedef struct _MSG_MAILBOX_REPLY
259{
260    U16                     Reserved1;          /* 00h */
261    U8                      MsgLength;          /* 02h */
262    U8                      Function;           /* 03h */
263    U16                     Reserved2;          /* 04h */
264    U8                      Reserved3;          /* 06h */
265    U8                      MsgFlags;           /* 07h */
266    U32                     MsgContext;         /* 08h */
267    U16                     MailboxStatus;      /* 0Ch */
268    U16                     IOCStatus;          /* 0Eh */
269    U32                     IOCLogInfo;         /* 10h */
270    U32                     Reserved4;          /* 14h */
271} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY,
272  MailboxReply_t, MPI_POINTER pMailboxReply_t;
273
274#endif