master
1/*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org>
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 *
26 * Portions of this software may have been developed with reference to
27 * the SD Simplified Specification. The following disclaimer may apply:
28 *
29 * The following conditions apply to the release of the simplified
30 * specification ("Simplified Specification") by the SD Card Association and
31 * the SD Group. The Simplified Specification is a subset of the complete SD
32 * Specification which is owned by the SD Card Association and the SD
33 * Group. This Simplified Specification is provided on a non-confidential
34 * basis subject to the disclaimers below. Any implementation of the
35 * Simplified Specification may require a license from the SD Card
36 * Association, SD Group, SD-3C LLC or other third parties.
37 *
38 * Disclaimers:
39 *
40 * The information contained in the Simplified Specification is presented only
41 * as a standard specification for SD Cards and SD Host/Ancillary products and
42 * is provided "AS-IS" without any representations or warranties of any
43 * kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD
44 * Card Association for any damages, any infringements of patents or other
45 * right of the SD Group, SD-3C LLC, the SD Card Association or any third
46 * parties, which may result from its use. No license is granted by
47 * implication, estoppel or otherwise under any patent or other rights of the
48 * SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing
49 * herein shall be construed as an obligation by the SD Group, the SD-3C LLC
50 * or the SD Card Association to disclose or distribute any technical
51 * information, know-how or other confidential information to any third party.
52 */
53
54#ifndef DEV_MMC_BRIDGE_H
55#define DEV_MMC_BRIDGE_H
56
57#include <sys/bus.h>
58
59/*
60 * This file defines interfaces for the mmc bridge. The names chosen
61 * are similar to or the same as the names used in Linux to allow for
62 * easy porting of what Linux calls mmc host drivers. I use the
63 * FreeBSD terminology of bridge and bus for consistency with other
64 * drivers in the system. This file corresponds roughly to the Linux
65 * linux/mmc/host.h file.
66 *
67 * A mmc bridge is a chipset that can have one or more mmc and/or sd
68 * cards attached to it. mmc devices are attached on a bus topology,
69 * while sd and sdio cards usually are attached using a star topology
70 * (meaning in practice each sd card has its own, independent slot).
71 * Since SDHCI v3.00, buses for esd and esdio are possible, though.
72 *
73 * Attached to the mmc bridge is an mmcbus. The mmcbus is described
74 * in dev/mmc/mmcbus_if.m.
75 */
76
77/*
78 * mmc_ios is a structure that is used to store the state of the mmc/sd
79 * bus configuration. This include the bus' clock speed, its voltage,
80 * the bus mode for command output, the SPI chip select, some power
81 * states and the bus width.
82 */
83enum mmc_vdd {
84 vdd_150 = 0, vdd_155, vdd_160, vdd_165, vdd_170, vdd_180,
85 vdd_190, vdd_200, vdd_210, vdd_220, vdd_230, vdd_240, vdd_250,
86 vdd_260, vdd_270, vdd_280, vdd_290, vdd_300, vdd_310, vdd_320,
87 vdd_330, vdd_340, vdd_350, vdd_360
88};
89
90enum mmc_vccq {
91 vccq_120 = 0, vccq_180, vccq_330
92};
93
94enum mmc_power_mode {
95 power_off = 0, power_up, power_on
96};
97
98enum mmc_bus_mode {
99 opendrain = 1, pushpull
100};
101
102enum mmc_chip_select {
103 cs_dontcare = 0, cs_high, cs_low
104};
105
106enum mmc_bus_width {
107 bus_width_1 = 0, bus_width_4 = 2, bus_width_8 = 3
108};
109
110enum mmc_drv_type {
111 drv_type_b = 0, drv_type_a, drv_type_c, drv_type_d
112};
113
114enum mmc_bus_timing {
115 bus_timing_normal = 0, bus_timing_hs, bus_timing_uhs_sdr12,
116 bus_timing_uhs_sdr25, bus_timing_uhs_sdr50, bus_timing_uhs_ddr50,
117 bus_timing_uhs_sdr104, bus_timing_mmc_ddr52, bus_timing_mmc_hs200,
118 bus_timing_mmc_hs400, bus_timing_mmc_hs400es, bus_timing_max =
119 bus_timing_mmc_hs400es
120};
121
122struct mmc_ios {
123 uint32_t clock; /* Speed of the clock in Hz to move data */
124 enum mmc_vdd vdd; /* Voltage to apply to the power pins */
125 enum mmc_vccq vccq; /* Voltage to use for signaling */
126 enum mmc_bus_mode bus_mode;
127 enum mmc_chip_select chip_select;
128 enum mmc_bus_width bus_width;
129 enum mmc_power_mode power_mode;
130 enum mmc_bus_timing timing;
131 enum mmc_drv_type drv_type;
132};
133
134enum mmc_card_mode {
135 mode_mmc, mode_sd
136};
137
138enum mmc_retune_req {
139 retune_req_none = 0, retune_req_normal, retune_req_reset
140};
141
142struct mmc_host {
143 int f_min;
144 int f_max;
145 uint32_t host_ocr;
146 uint32_t ocr;
147 uint32_t caps;
148#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can do 4-bit data transfers */
149#define MMC_CAP_8_BIT_DATA (1 << 1) /* Can do 8-bit data transfers */
150#define MMC_CAP_HSPEED (1 << 2) /* Can do High Speed transfers */
151#define MMC_CAP_BOOT_NOACC (1 << 4) /* Cannot access boot partitions */
152#define MMC_CAP_WAIT_WHILE_BUSY (1 << 5) /* Host waits for busy responses */
153#define MMC_CAP_UHS_SDR12 (1 << 6) /* Can do UHS SDR12 */
154#define MMC_CAP_UHS_SDR25 (1 << 7) /* Can do UHS SDR25 */
155#define MMC_CAP_UHS_SDR50 (1 << 8) /* Can do UHS SDR50 */
156#define MMC_CAP_UHS_SDR104 (1 << 9) /* Can do UHS SDR104 */
157#define MMC_CAP_UHS_DDR50 (1 << 10) /* Can do UHS DDR50 */
158#define MMC_CAP_MMC_DDR52_120 (1 << 11) /* Can do eMMC DDR52 at 1.2 V */
159#define MMC_CAP_MMC_DDR52_180 (1 << 12) /* Can do eMMC DDR52 at 1.8 V */
160#define MMC_CAP_MMC_DDR52 (MMC_CAP_MMC_DDR52_120 | MMC_CAP_MMC_DDR52_180)
161#define MMC_CAP_MMC_HS200_120 (1 << 13) /* Can do eMMC HS200 at 1.2 V */
162#define MMC_CAP_MMC_HS200_180 (1 << 14) /* Can do eMMC HS200 at 1.8 V */
163#define MMC_CAP_MMC_HS200 (MMC_CAP_MMC_HS200_120| MMC_CAP_MMC_HS200_180)
164#define MMC_CAP_MMC_HS400_120 (1 << 15) /* Can do eMMC HS400 at 1.2 V */
165#define MMC_CAP_MMC_HS400_180 (1 << 16) /* Can do eMMC HS400 at 1.8 V */
166#define MMC_CAP_MMC_HS400 (MMC_CAP_MMC_HS400_120 | MMC_CAP_MMC_HS400_180)
167#define MMC_CAP_MMC_HSX00_120 (MMC_CAP_MMC_HS200_120 | MMC_CAP_MMC_HS400_120)
168#define MMC_CAP_MMC_ENH_STROBE (1 << 17) /* Can do eMMC Enhanced Strobe */
169#define MMC_CAP_SIGNALING_120 (1 << 18) /* Can do signaling at 1.2 V */
170#define MMC_CAP_SIGNALING_180 (1 << 19) /* Can do signaling at 1.8 V */
171#define MMC_CAP_SIGNALING_330 (1 << 20) /* Can do signaling at 3.3 V */
172#define MMC_CAP_DRIVER_TYPE_A (1 << 21) /* Can do Driver Type A */
173#define MMC_CAP_DRIVER_TYPE_C (1 << 22) /* Can do Driver Type C */
174#define MMC_CAP_DRIVER_TYPE_D (1 << 23) /* Can do Driver Type D */
175 enum mmc_card_mode mode;
176 struct mmc_ios ios; /* Current state of the host */
177};
178
179#ifdef _KERNEL
180extern driver_t mmc_driver;
181
182#define MMC_VERSION 5
183
184#define MMC_DECLARE_BRIDGE(name) \
185 DRIVER_MODULE(mmc, name, mmc_driver, NULL, NULL); \
186 MODULE_DEPEND(name, mmc, MMC_VERSION, MMC_VERSION, MMC_VERSION);
187#define MMC_DEPEND(name) \
188 MODULE_DEPEND(name, mmc, MMC_VERSION, MMC_VERSION, MMC_VERSION);
189#endif /* _KERNEL */
190
191#endif /* DEV_MMC_BRIDGE_H */