master
1/*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
5 * Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30/*
31 * Cirrus Logic CD180 registers
32 */
33
34/* Global registers */
35#define CD180_GIVR 0x40 /* Global Interrupt Verctor Register */
36#define CD180_GICR 0x41 /* Global Interrupting Channel Register */
37#define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */
38#define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */
39#define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */
40#define CD180_CAR 0x64 /* Channel Access Register */
41#define CD180_GFRCR 0x6B /* Global Firmware Revision Code Register */
42#define CD180_PPRH 0x70 /* Prescaler Period Register MSB */
43#define CD180_PPRL 0x71 /* Prescaler Period Register LSB */
44#define CD180_RDR 0x78 /* Receiver Data Register */
45#define CD180_RCSR 0x7A /* Receiver Character Status Register */
46#define CD180_TDR 0x7B /* Transmit Data Register */
47#define CD180_EOIR 0x7F /* End of Interrupt Register */
48
49/* Channel Registers */
50#define CD180_CCR 0x01 /* Channel Command Register */
51#define CD180_IER 0x02 /* Interrupt Enable Register */
52#define CD180_COR1 0x03 /* Channel Option Register 1 */
53#define CD180_COR2 0x04 /* Channel Option Register 1 */
54#define CD180_COR3 0x05 /* Channel Option Register 1 */
55#define CD180_CCSR 0x06 /* Channel Control STatus Register */
56#define CD180_RDCR 0x07 /* Receive Data Count Register */
57#define CD180_SCHR1 0x09 /* Special Character Register 1 */
58#define CD180_SCHR2 0x0A /* Special Character Register 2 */
59#define CD180_SCHR3 0x0B /* Special Character Register 3 */
60#define CD180_SCHR4 0x0C /* Special Character Register 4 */
61#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */
62#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */
63#define CD180_MCR 0x12 /* Modem Change Register */
64#define CD180_RTPR 0x18 /* Receive Timeout Period Register */
65#define CD180_MSVR 0x28 /* Modem Signal Value Register */
66#define CD180_RBPRH 0x31 /* Receive Baud Rate Period Register MSB */
67#define CD180_RBPRL 0x32 /* Receive Baud Rate Period Register LSB */
68#define CD180_TBPRH 0x39 /* Transmit Baud Rate Period Register MSB */
69#define CD180_TBPRL 0x3A /* Transmit Baud Rate Period Register LSB */
70
71/** Register descritpions **/
72
73/* Global Interrupt Vector Register */
74#define GIVR_IT_MSCI 0x01 /* Modem Signal Change Interrupt */
75#define GIVR_IT_TDI 0x02 /* Transmit Data Interrupt */
76#define GIVR_IT_RGDI 0x03 /* Receive Good Data Interrupt */
77#define GIVR_IT_REI 0x07 /* Receive Exception Interrupt */
78
79/* Global Interrupt Channel Register */
80#define GICR_CHAN 0x1C /* Channel Number Mask */
81#define GICR_LSH 2 /* Channel Number Shift */
82
83/* Channel Address Register */
84#define CAR_CHAN 0x07 /* Channel Number Mask */
85#define CAR_A7 0x08 /* Address bit 7 (unused) */
86
87/* Receive Character Status Register */
88#define RCSR_OE 0x01 /* Overrun Error */
89#define RCSR_FE 0x02 /* Frame Error */
90#define RCSR_PE 0x04 /* Parity Error */
91#define RCSR_Break 0x08 /* Break detected */
92#define RCSR_Timeout 0x80 /* Rx Timeout */
93#define RCSR_SCMASK 0x70 /* Special Character Detected Mask */
94#define RCSR_SC1 0x10 /* Special Char 1 (or 1 & 3 seq matched) */
95#define RCSR_SC2 0x20 /* Special Char 2 (or 2 & 4 seq matched) */
96#define RCSR_SC3 0x30 /* Special Char 3 */
97#define RCSR_SC4 0x40 /* Special Char 4 */
98
99/* Channel Command Register */
100#define CCR_ResetChan 0x80 /* Reset Channel */
101#define CCR_HWRESET 0x81 /* Hardware Reset (all channels) */
102#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */
103#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */
104#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */
105#define CCR_SENDSPCH1 0x21 /* Send Special Character 1 */
106#define CCR_SENDSPCH2 0x22 /* Send Special Character 2 */
107#define CCR_SENDSPCH3 0x23 /* Send Special Character 3 */
108#define CCR_SENDSPCH4 0x24 /* Send Special Character 4 */
109#define CCR_RCVRDIS 0x11 /* Receiver Disable */
110#define CCR_RCVREN 0x12 /* Receiver Enable */
111#define CCR_XMTRDIS 0x14 /* Transmitter Disable */
112#define CCR_XMTREN 0x18 /* Transmitter Enable */
113
114/* Interrupt Enable Register */
115#define IER_DSR 0x80 /* Enable interrupt on DSR change */
116#define IER_CD 0x40 /* Enable interrupt on CD change */
117#define IER_CTS 0x20 /* Enable interrupt on CTS change */
118#define IER_RxData 0x10 /* Enable interrupt on Receive Data */
119#define IER_RxSC 0x08 /* Enable interrupt on Receive Spec. Char */
120#define IER_TxRdy 0x04 /* Enable interrupt on TX FIFO empty */
121#define IER_TxMpty 0x02 /* Enable interrupt on TX completely empty*/
122#define IER_RET 0x01 /* Enable interrupt on RX Except. Timeout */
123
124/* Channel Option Register 1 */
125#define COR1_ODDP 0x80 /* Odd Parity */
126#define COR1_ParMMASK 0x60 /* Parity Mode mask */
127#define COR1_NOPAR 0x02 /* No Parity */
128#define COR1_FORCEPAR 0x20 /* Force Parity */
129#define COR1_NORMPAR 0x40 /* Normal Parity */
130#define COR1_Ignore 0x10 /* Ignore Parity on RX */
131#define COR1_StopMASK 0x0C /* Stop Bits mode mask */
132#define COR1_1SB 0x00 /* 1 Stop Bit */
133#define COR1_15SB 0x04 /* 1.5 Stop Bits */
134#define COR1_2SB 0x08 /* 2 Stop Bits */
135#define COR1_CHLMASK 0x03 /* Character Length mask */
136#define COR1_5BITS 0x00 /* 5 bits */
137#define COR1_6BITS 0x01 /* 6 bits */
138#define COR1_7BITS 0x02 /* 7 bits */
139#define COR1_8BITS 0x03 /* 8 bits */
140
141/* Channel Option Register 2 */
142#define COR2_IXM 0x80 /* Implied XON mode */
143#define COR2_TxIBE 0x40 /* Enable In-Band XON/XOFF Flow Control */
144#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
145#define COR2_LLM 0x10 /* Local Loopback Mode */
146#define COR2_RLM 0x08 /* Remote Loopback Mode */
147#define COR2_RtsAO 0x04 /* RTS Automatic Output Enable */
148#define COR2_CtsAE 0x02 /* CTS Automatic Enable */
149#define COR2_DsrAE 0x01 /* DSR Automatic Enable */
150
151/* Channel Option Register 3 */
152#define COR3_XonCH 0x80 /* XON is a double seq (1 & 3) */
153#define COR3_XoffCH 0x40 /* XOFF is a double seq (1 & 3) */
154#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
155#define COR3_SCDE 0x10 /* Special Character Detection Enable */
156#define COR3_RxTHMASK 0x0F /* RX FIFO Threshold value (1-8) */
157
158/* Channel Control Status Register */
159#define CCSR_RxEn 0x80 /* Revceiver Enabled */
160#define CCSR_RxFloff 0x40 /* Receive Flow Off (XOFF sent) */
161#define CCSR_RxFlon 0x20 /* Receive Flow On (XON sent) */
162#define CCSR_TxEn 0x08 /* Transmitter Enabled */
163#define CCSR_TxFloff 0x04 /* Transmit Flow Off (got XOFF) */
164#define CCSR_TxFlon 0x02 /* Transmit Flow On (got XON) */
165
166/* Modem Change Option Register 1 */
167#define MCOR1_DSRzd 0x80 /* Detect 0->1 transition of DSR */
168#define MCOR1_CDzd 0x40 /* Detect 0->1 transition of CD */
169#define MCOR1_CTSzd 0x20 /* Detect 0->1 transition of CTS */
170#define MCOR1_DTRthMASK 0x0F /* Automatic DTR FC Threshold (1-8) chars */
171
172/* Modem Change Option Register 2 */
173#define MCOR2_DSRod 0x80 /* Detect 1->0 transition of DSR */
174#define MCOR2_CDod 0x40 /* Detect 1->0 transition of CD */
175#define MCOR2_CTSod 0x20 /* Detect 1->0 transition of CTS */
176
177/* Modem Change Register */
178#define MCR_DSRchg 0x80 /* DSR Changed */
179#define MCR_CDchg 0x40 /* CD Changed */
180#define MCR_CTSchg 0x20 /* CTS Changed */
181
182/* Modem Signal Value Register */
183#define MSVR_DSR 0x80 /* Current state of DSR input */
184#define MSVR_CD 0x40 /* Current state of DSR input */
185#define MSVR_CTS 0x20 /* Current state of CTS input */
186#define MSVR_DTR 0x02 /* Current state of DTR output */
187#define MSVR_RTS 0x01 /* Current state of RTS output */
188
189/* Escape characters */
190#define CD180_C_ESC 0x00 /* Escape character */
191#define CD180_C_SBRK 0x81 /* Start sending BREAK */
192#define CD180_C_DELAY 0x82 /* Delay output */
193#define CD180_C_EBRK 0x83 /* Stop sending BREAK */
194
195/* Miscellaneous */
196#define CD180_NCHAN 8 /* 8 channels per chip */
197#define CD180_CTICKS 16 /* 16 ticks for character processing */
198#define CD180_NFIFO 8 /* 8 bytes in FIFO */