master
1/*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright 2009 Scott Long
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29#ifndef _CAM_CAM_XPT_INTERNAL_H
30#define _CAM_CAM_XPT_INTERNAL_H 1
31
32#include <sys/taskqueue.h>
33
34/* Forward Declarations */
35struct cam_eb;
36struct cam_et;
37struct cam_ed;
38
39typedef struct cam_ed * (*xpt_alloc_device_func)(struct cam_eb *bus,
40 struct cam_et *target,
41 lun_id_t lun_id);
42typedef void (*xpt_release_device_func)(struct cam_ed *device);
43typedef void (*xpt_action_func)(union ccb *start_ccb);
44typedef void (*xpt_dev_async_func)(uint32_t async_code,
45 struct cam_eb *bus,
46 struct cam_et *target,
47 struct cam_ed *device,
48 void *async_arg);
49typedef void (*xpt_announce_periph_func)(struct cam_periph *periph);
50typedef void (*xpt_announce_periph_sbuf_func)(struct cam_periph *periph, struct sbuf *sbuf);
51
52struct xpt_xport_ops {
53 xpt_alloc_device_func alloc_device;
54 xpt_release_device_func reldev;
55 xpt_action_func action;
56 xpt_dev_async_func async;
57 xpt_announce_periph_sbuf_func announce_sbuf;
58};
59
60struct xpt_xport {
61 cam_xport xport;
62 const char *name;
63 struct xpt_xport_ops *ops;
64};
65
66SET_DECLARE(cam_xpt_xport_set, struct xpt_xport);
67#define CAM_XPT_XPORT(data) \
68 DATA_SET(cam_xpt_xport_set, data)
69
70typedef void (*xpt_proto_announce_func)(struct cam_ed *);
71typedef void (*xpt_proto_announce_sbuf_func)(struct cam_ed *, struct sbuf *);
72typedef void (*xpt_proto_debug_out_func)(union ccb *);
73
74struct xpt_proto_ops {
75 xpt_proto_announce_sbuf_func announce_sbuf;
76 xpt_proto_announce_sbuf_func denounce_sbuf;
77 xpt_proto_debug_out_func debug_out;
78};
79
80struct xpt_proto {
81 cam_proto proto;
82 const char *name;
83 struct xpt_proto_ops *ops;
84};
85
86SET_DECLARE(cam_xpt_proto_set, struct xpt_proto);
87#define CAM_XPT_PROTO(data) \
88 DATA_SET(cam_xpt_proto_set, data)
89
90/*
91 * The CAM EDT (Existing Device Table) contains the device information for
92 * all devices for all buses in the system. The table contains a
93 * cam_ed structure for each device on the bus.
94 */
95struct cam_ed {
96 cam_pinfo devq_entry;
97 TAILQ_ENTRY(cam_ed) links;
98 struct cam_et *target;
99 struct cam_sim *sim;
100 lun_id_t lun_id;
101 struct cam_ccbq ccbq; /* Queue of pending ccbs */
102 struct async_list asyncs; /* Async callback info for this B/T/L */
103 struct periph_list periphs; /* All attached devices */
104 u_int generation; /* Generation number */
105 void *quirk; /* Oddities about this device */
106 u_int maxtags;
107 u_int mintags;
108 cam_proto protocol;
109 u_int protocol_version;
110 cam_xport transport;
111 u_int transport_version;
112 struct scsi_inquiry_data inq_data;
113 uint8_t *supported_vpds;
114 uint8_t supported_vpds_len;
115 uint32_t device_id_len;
116 uint8_t *device_id;
117 uint32_t ext_inq_len;
118 uint8_t *ext_inq;
119 uint8_t physpath_len;
120 uint8_t *physpath; /* physical path string form */
121 uint32_t rcap_len;
122 uint8_t *rcap_buf;
123 struct ata_params ident_data;
124 struct mmc_params mmc_ident_data;
125 uint8_t inq_flags; /*
126 * Current settings for inquiry flags.
127 * This allows us to override settings
128 * like disconnection and tagged
129 * queuing for a device.
130 */
131 uint8_t queue_flags; /* Queue flags from the control page */
132 uint8_t serial_num_len;
133 uint8_t *serial_num;
134 uint32_t flags;
135#define CAM_DEV_UNCONFIGURED 0x01
136#define CAM_DEV_REL_TIMEOUT_PENDING 0x02
137#define CAM_DEV_REL_ON_COMPLETE 0x04
138#define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08
139#define CAM_DEV_TAG_AFTER_COUNT 0x20
140#define CAM_DEV_INQUIRY_DATA_VALID 0x40
141#define CAM_DEV_IN_DV 0x80
142#define CAM_DEV_DV_HIT_BOTTOM 0x100
143#define CAM_DEV_IDENTIFY_DATA_VALID 0x200
144 uint32_t tag_delay_count;
145#define CAM_TAG_DELAY_COUNT 5
146 uint32_t tag_saved_openings;
147 uint32_t refcount;
148 struct callout callout;
149 STAILQ_ENTRY(cam_ed) highpowerq_entry;
150 struct mtx device_mtx;
151 struct task device_destroy_task;
152 struct nvme_controller_data *nvme_cdata;
153 struct nvme_namespace_data *nvme_data;
154};
155
156/*
157 * Each target is represented by an ET (Existing Target). These
158 * entries are created when a target is successfully probed with an
159 * identify, and removed when a device fails to respond after a number
160 * of retries, or a bus rescan finds the device missing.
161 */
162struct cam_et {
163 TAILQ_HEAD(, cam_ed) ed_entries;
164 TAILQ_ENTRY(cam_et) links;
165 struct cam_eb *bus;
166 target_id_t target_id;
167 uint32_t refcount;
168 u_int generation;
169 struct timeval last_reset;
170 u_int rpl_size;
171 struct scsi_report_luns_data *luns;
172 struct mtx luns_mtx; /* Protection for luns field. */
173};
174
175/*
176 * Each bus is represented by an EB (Existing Bus). These entries
177 * are created by calls to xpt_bus_register and deleted by calls to
178 * xpt_bus_deregister.
179 */
180struct cam_eb {
181 TAILQ_HEAD(, cam_et) et_entries;
182 TAILQ_ENTRY(cam_eb) links;
183 path_id_t path_id;
184 struct cam_sim *sim;
185 struct timeval last_reset;
186 uint32_t flags;
187#define CAM_EB_RUNQ_SCHEDULED 0x01
188 uint32_t refcount;
189 u_int generation;
190 device_t parent_dev;
191 struct xpt_xport *xport;
192 struct mtx eb_mtx; /* Bus topology mutex. */
193};
194
195struct cam_path {
196 struct cam_periph *periph;
197 struct cam_eb *bus;
198 struct cam_et *target;
199 struct cam_ed *device;
200};
201
202struct cam_ed * xpt_alloc_device(struct cam_eb *bus,
203 struct cam_et *target,
204 lun_id_t lun_id);
205void xpt_acquire_device(struct cam_ed *device);
206void xpt_release_device(struct cam_ed *device);
207uint32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings);
208void xpt_start_tags(struct cam_path *path);
209void xpt_stop_tags(struct cam_path *path);
210
211MALLOC_DECLARE(M_CAMXPT);
212
213#endif