master
  1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
  2/*
  3 * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
  4 * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
  5 * Copyright (C) 2016-2017 Intel Deutschland GmbH
  6 */
  7#ifndef __VENDOR_CMD_INTEL_H__
  8#define __VENDOR_CMD_INTEL_H__
  9
 10#define INTEL_OUI	0x001735
 11
 12/**
 13 * enum iwl_mvm_vendor_cmd - supported vendor commands
 14 * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
 15 * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
 16 *	This is useful when the CSME firmware owns the device and the kernel
 17 *	wants to use it. In case the CSME firmware has no connection active the
 18 *	kernel will manage on its own to get ownership of the device.
 19 *	When the CSME firmware has an active connection, the user space
 20 *	involvement is required. The kernel will assert the RFKILL signal with
 21 *	the "device not owned" reason so that nobody can touch the device. Then
 22 *	the user space can run the following flow to be able to get connected
 23 *	to the very same AP the CSME firmware is currently connected to:
 24 *
 25 *	1) The user space (NetworkManager) boots and sees that the device is
 26 *	    in RFKILL because the host doesn't own the device
 27 *	2) The user space asks the kernel what AP the CSME firmware is
 28 *	   connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO)
 29 *	3) The user space checks if it has a profile that matches the reply
 30 *	   from the CSME firmware
 31 *	4) The user space installs a network to the wpa_supplicant with a
 32 *	   specific BSSID and a specific frequency
 33 *	5) The user space prevents any type of full scan
 34 *	6) The user space asks iwlmei to request ownership on the device (with
 35 *	   this command)
 36 *	7) iwlmei requests ownership from the CSME firmware
 37 *	8) The CSME firmware grants ownership
 38 *	9) iwlmei tells iwlwifi to lift the RFKILL
 39 *	10) RFKILL OFF is reported to user space
 40 *	11) The host boots the device, loads the firwmare, and connects to a
 41 *	    specific BSSID without scanning including IP as fast as it can
 42 *	12) The host reports to the CSME firmware that there is a connection
 43 *	13) The TCP connection is preserved and the host has connectivity
 44 *
 45 * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
 46 *	It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
 47 *	&IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
 48 */
 49
 50enum iwl_mvm_vendor_cmd {
 51	IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO			= 0x2d,
 52	IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP			= 0x30,
 53	IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT		= 0x32,
 54};
 55
 56enum iwl_vendor_auth_akm_mode {
 57	IWL_VENDOR_AUTH_OPEN,
 58	IWL_VENDOR_AUTH_RSNA = 0x6,
 59	IWL_VENDOR_AUTH_RSNA_PSK,
 60	IWL_VENDOR_AUTH_SAE = 0x9,
 61	IWL_VENDOR_AUTH_MAX,
 62};
 63
 64/**
 65 * enum iwl_mvm_vendor_attr - attributes used in vendor commands
 66 * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
 67 * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
 68 * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
 69 * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
 70 * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
 71 *	mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
 72 * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
 73 *	roaming is forbidden or not. Value 1 means roaming is forbidden,
 74 *	0 mean roaming is allowed.
 75 * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
 76 *	as specified in &enum iwl_vendor_auth_akm_mode.
 77 * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
 78 * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
 79 *	0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
 80 * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
 81 *	collocated AP. Relevant for 6GHz AP info.
 82 * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
 83 *	Relevant for 6GHz AP info.
 84 *
 85 * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
 86 * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
 87
 88 */
 89enum iwl_mvm_vendor_attr {
 90	__IWL_MVM_VENDOR_ATTR_INVALID				= 0x00,
 91	IWL_MVM_VENDOR_ATTR_VIF_ADDR				= 0x02,
 92	IWL_MVM_VENDOR_ATTR_ADDR				= 0x0a,
 93	IWL_MVM_VENDOR_ATTR_SSID				= 0x3d,
 94	IWL_MVM_VENDOR_ATTR_STA_CIPHER				= 0x51,
 95	IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN			= 0x64,
 96	IWL_MVM_VENDOR_ATTR_AUTH_MODE				= 0x65,
 97	IWL_MVM_VENDOR_ATTR_CHANNEL_NUM				= 0x66,
 98	IWL_MVM_VENDOR_ATTR_BAND				= 0x69,
 99	IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL			= 0x70,
100	IWL_MVM_VENDOR_ATTR_COLLOC_ADDR				= 0x71,
101
102	NUM_IWL_MVM_VENDOR_ATTR,
103	MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
104};
105
106#endif /* __VENDOR_CMD_INTEL_H__ */